About Hagel Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hagel: Pierce County Fire 155.8200 MHz, narrow FM, 114.8 PL. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Pierce County Fire talkgroup 35203 (hex 8983).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hagel, start with the Pickardville site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 30 miles away. Its control channels: 853.9125 MHz.
Data updated .
Pierce County channels that also cover Hagel
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pierce County Fire | Sheriff & Fire/EMS Dispatch | 155.8200 In 153.9800 | 114.8 PL | FMN | KEL527 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pierce County Fire | Rugby Fire Department | 154.3400 | CSQ | FMN | WNXR955 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pierce County Hospital | Good Samaritan Hospital | 155.1750 | CSQ | FMN | WPQY748 |
| Pierce County Hospital | Good Samaritan Hospital | 155.3400 | CSQ | FMN | WPQY748 |
| Pierce County Hospital | Good Samaritan Hospital | 461.3750 In 466.3750 | CSQ | FMN | KNJD831 |
North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pierce County Fire | County Fire/EMS Main | 35203 | 8983 | T |
| Pierce County Fire | County Fire/EMS Operations | 35204 | 8984 | T |
| Pierce County Fire | County Fire/EMS Operations | 35205 | 8985 | T |
| Pierce County Fire | County Fire/EMS Operations | 35206 | 8986 | T |
| Pierce County Fire | County Fire/EMS Operations | 35207 | 8987 | T |
| Pierce County EMS | County EMS Operations | 35301 | 89e5 | T |
| Pierce County EMS | County EMS Operations | 35302 | 89e6 | T |
Nearest trunked radio sites
Distances are measured from the center of Hagel.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hagel?
We do not have a fire dispatch channel listed specifically for Hagel. The county-level fire dispatch channels in the same county: Pierce County Fire 155.8200 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Hagel?
Yes. The county-level systems that cover Hagel are Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hagel?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hagel?
For Hagel, start with the Pickardville site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.