Skip to content

Dunbar Fire and EMS Frequencies

We do not have frequencies listed specifically for Dunbar in Sargent County, North Dakota yet. Countywide channels for Sargent County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Stirum (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 16 miles away.

About Dunbar Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Dunbar: Sargent County Fire 155.0250 MHz, narrow FM, 110.9 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Sargent County channels that also cover Dunbar

Fire Dispatch

Fire Dispatch frequencies for Sargent County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sargent County FireSargent County Fire – Fire – EMS Dispatch155.0250
In 155.8050
110.9 PLFMNKXM899

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sargent County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sargent County FireForman Fire Department155.5275FMNWQOE443

Nearest trunked radio sites

Distances are measured from the center of Dunbar.

Stirum · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 93 (hex 5D) · NAC A6C · about 16 mi away
Control 853.7375
Voice 852.5625, 853.5125
Cayuga · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 9 (hex 9) · NAC A68 · about 16 mi away
Control 852.0875, 852.3125
Voice 851.8125
Enderlin · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 118 (hex 76) · NAC A65 · about 22 mi away
Control 853.4625, 853.6875
Voice 853.9125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Dunbar?

We do not have a fire dispatch channel listed specifically for Dunbar. The county-level fire dispatch channels in the same county: Sargent County Fire 155.0250 MHz, narrow FM, 110.9 PL.

What scanner do I need to listen to fire and EMS in Dunbar?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Dunbar?

For Dunbar, start with the Stirum site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.