Skip to content

Greenview Fire and EMS Frequencies

We do not have frequencies listed specifically for Greenview in Steele County, North Dakota yet. Countywide channels for Steele County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Finley (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 10 miles away.

About Greenview Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Greenview: Steele County Fire 154.3850 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Greenview: Steele County EMS 154.0250 MHz, narrow FM, 123.0 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Steele County Fire talkgroup 22416 (hex 5790).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 10 talkgroups; North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Greenview, start with the Finley site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 10 miles away. Its control channels: 853.7125 MHz.

Data updated .

Steele County channels that also cover Greenview

Fire Dispatch

Fire Dispatch frequencies for Steele County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Steele County FireHope FIre Protection District154.3850
In 153.9500
123.0 PLFMNWNXF577

EMS Dispatch

EMS Dispatch frequencies for Steele County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Steele County EMSFinley Ambulance Service154.0250
In 155.9400
123.0 PLFMNWNJH680

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Steele County FireSteele Co Fire Main224165790D
Steele County FireOwatonna Fire Department Operations224175791D
Steele County FireOwatonna Fire Department Operations224185792D
Steele County FireOwatonna Fire Department Operations224195793D
Steele County FireBlooming Prairie Fire Department Operations224205794D
Steele County FireBlooming Prairie Fire Department Operations224215795D
Steele County FireEllendale Fire Department Operations224225796D
Steele County FireEllendale Fire Department Operations224235797D
Steele County FireMedford Fire Department Operations224245798D
Steele County FireMedford Fire Department Operations224255799D

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Steele County EMSCounty EMS Operations46301b4ddT
Steele County EMSCounty EMS Operations46302b4deT

Nearest trunked radio sites

Distances are measured from the center of Greenview.

Finley · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 20 (hex 14) · about 10 mi away
Control 853.7125
Voice 853.2625, 853.4875
Hannaford · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 22 (hex 16) · NAC A65 · about 16 mi away
Control 853.6625, 853.8875
Voice 853.4375
Lakota · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 64 (hex 40) · about 36 mi away
Control 853.8125
Voice 853.3625, 853.5875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Greenview?

We do not have a fire dispatch channel listed specifically for Greenview. The county-level fire dispatch channels in the same county: Steele County Fire 154.3850 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Greenview?

We do not have a EMS dispatch channel listed specifically for Greenview. The county-level EMS dispatch channels in the same county: Steele County EMS 154.0250 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Greenview?

Yes. The county-level systems that cover Greenview are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 10 talkgroups; North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Greenview?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Greenview?

For Greenview, start with the Finley site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.