Skip to content

Bethel Fire and EMS Frequencies

We do not have frequencies listed specifically for Bethel in Towner County, North Dakota yet. Countywide channels for Towner County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Egeland (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 15 miles away.

About Bethel Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bethel: Towner County Fire 154.9800 MHz, narrow FM, 131.8 PL. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Towner County EMS talkgroup 48301 (hex bcad).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bethel, start with the Egeland site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 15 miles away. Its control channels: 852.1375, 852.3625 MHz.

Data updated .

Towner County channels that also cover Bethel

Fire Dispatch

Fire Dispatch frequencies for Towner County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Towner County FireSheriff's Dispatch Law/Fire/EMS154.9800
In 153.8000
131.8 PLFMNKDY343

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Towner County EMSTowner EMS Operations48301bcadT

Nearest trunked radio sites

Distances are measured from the center of Bethel.

Egeland · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 96 (hex 60) · NAC A61 · about 15 mi away
Control 852.1375, 852.3625
Voice 851.8625
Rock Lake · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 72 (hex 48) · NAC A67 · about 22 mi away
Control 852.0375, 852.2625
Voice 851.7625
Edmore · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 92 (hex 5C) · NAC A6B · about 28 mi away
Control 853.6625, 853.8875
Voice 853.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bethel?

We do not have a fire dispatch channel listed specifically for Bethel. The county-level fire dispatch channels in the same county: Towner County Fire 154.9800 MHz, narrow FM, 131.8 PL.

Do fire departments and EMS use a trunked radio system in Bethel?

Yes. The county-level systems that cover Bethel are Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bethel?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bethel?

For Bethel, start with the Egeland site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.1375, 852.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.