About Fertile Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fertile: Walsh County Fire 155.0550 MHz, narrow FM, 110.9 PL. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Walsh County Fire talkgroup 50205 (hex c41d).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Fertile, start with the Fordville site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 5 miles away. Its control channels: 853.7875 MHz.
Data updated .
Walsh County channels that also cover Fertile
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walsh County Fire | Paging EMS/Fire – County Services | 155.0550 In 158.8350 | 110.9 PL | FMN | KNNU593 |
| Walsh County Fire | County Fire/EMS Services | 155.8200 In 153.9800 | NAC 455 | P25 | KDV388 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walsh County Fire | Hoople Fire Department | 154.0700 | CSQ | FMN | WNXV602 |
| Walsh County Fire | Park River Fire Department | 158.8650 | FMN | WPCH798 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Walsh County EMS | Valley Ambulance Service – Grafton | 155.2800 | CSQ | FMN | KY7708 |
North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Walsh County Fire | County Fire/EMS Dispatch | 50205 | c41d | T |
Nearest trunked radio sites
Distances are measured from the center of Fertile.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fertile?
We do not have a fire dispatch channel listed specifically for Fertile. The county-level fire dispatch channels in the same county: Walsh County Fire 155.0550 MHz, narrow FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Fertile?
Yes. The county-level systems that cover Fertile are Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Fertile?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Fertile?
For Fertile, start with the Fordville site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.