Skip to content

Blue Ridge Fire and EMS Frequencies

We do not have frequencies listed specifically for Blue Ridge in Williams County, North Dakota yet. Countywide channels for Williams County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Alamo (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 11 miles away.

About Blue Ridge Fire and EMS Frequencies

Quick answer: Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Williams County Fire talkgroup 53210 (hex cfda).

  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Blue Ridge, start with the Alamo site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 11 miles away. Its control channels: 852.0375, 852.2625 MHz.

Data updated .

Williams County channels that also cover Blue Ridge

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Williams County FireCounty Fire/EMS Main Dispatch53210cfdaT
Williams County FireCounty Fire/EMS Main Dispatch53211cfdbT
Williams County- City of WillistonWilliston Airport Fire53208cfd8T
Williams County FireCounty Fire Operations53212cfdcT
Williams County FireCounty Fire Operations53213cfddT
Williams County FireCounty Fire Operations53214cfdeT
Williams County- City of WillistonSanford Williston Air EVAC53805d22dT
Williams County HospitalTioga Medical Center ER53802d22aT
Williams County- City of WillistonSt Alexis Williston ER53801d229T
Williams County- City of WillistonSanford Williston ER53803d22bT

Nearest trunked radio sites

Distances are measured from the center of Blue Ridge.

Alamo · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 47 (hex 2F) · NAC A6E · about 11 mi away
Control 852.0375, 852.2625
Voice 851.7625
Grenora · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 45 (hex 2D) · NAC A6C · about 13 mi away
Control 853.6875, 853.9125
Voice 853.4625
Fortuna · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 21 (hex 15) · NAC A64 · about 19 mi away
Control 852.1875, 852.4125
Voice 851.9125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Blue Ridge?

Yes. The county-level systems that cover Blue Ridge are Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Blue Ridge?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Blue Ridge?

For Blue Ridge, start with the Alamo site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.0375, 852.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.