Skip to content

Round Prairie Fire and EMS Frequencies

We do not have frequencies listed specifically for Round Prairie in Williams County, North Dakota yet. Countywide channels for Williams County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Williston Metro Simulcast (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 15 miles away.

About Round Prairie Fire and EMS Frequencies

Quick answer: Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Williams County Fire talkgroup 53210 (hex cfda).

  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Round Prairie, start with the Williston Metro Simulcast site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 15 miles away. Its control channels: 853.2625, 853.8125 MHz.

Data updated .

Williams County channels that also cover Round Prairie

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Williams County FireCounty Fire/EMS Main Dispatch53210cfdaT
Williams County FireCounty Fire/EMS Main Dispatch53211cfdbT
Williams County- City of WillistonWilliston Airport Fire53208cfd8T
Williams County FireCounty Fire Operations53212cfdcT
Williams County FireCounty Fire Operations53213cfddT
Williams County FireCounty Fire Operations53214cfdeT
Williams County- City of WillistonSanford Williston Air EVAC53805d22dT
Williams County HospitalTioga Medical Center ER53802d22aT
Williams County- City of WillistonSt Alexis Williston ER53801d229T
Williams County- City of WillistonSanford Williston ER53803d22bT

Nearest trunked radio sites

Distances are measured from the center of Round Prairie.

Williston Metro Simulcast · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 2 (hex 2) · NAC A61 · about 15 mi away
Control 853.2625, 853.8125
Voice 852.8625, 853.1375
Cartwright · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 84 (hex 54) · about 21 mi away
Control 852.1625, 852.3875
Voice 851.8875
Williston State Tower · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 46 (hex 2E) · NAC A6D · about 24 mi away
Control 852.1375, 852.3625
Voice 851.8625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Round Prairie?

Yes. The county-level systems that cover Round Prairie are Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Round Prairie?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Round Prairie?

For Round Prairie, start with the Williston Metro Simulcast site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.2625, 853.8125 MHz. Program a control channel first; the scanner finds the voice channels from it.