Skip to content

Amanda Fire and EMS Frequencies

We do not have frequencies listed specifically for Amanda in Allen County, Ohio yet. Countywide channels for Allen County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lima (Ohio MARCS-IP: Multi-Agency Radio Communications), about 9 miles away.

About Amanda Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Amanda: American Township Fire - Dispatch 151.0250 MHz, narrow FM, 315 DPL; American Township Fire - Training 154.4000 MHz, narrow FM, 627 DPL; County Fire Dispatch 155.0550 MHz, narrow FM, 243 DPL. County-level ems dispatch that covers Amanda: EMS Agencies 155.0550 MHz, narrow FM, 243 DPL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Allen County Fire talkgroup 5509 (hex 1585).

  • 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Amanda, start with the Lima site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 9 miles away. Its control channels: 774.45625, 774.78125 MHz.

Data updated .

Allen County channels that also cover Amanda

Fire Dispatch

Fire Dispatch frequencies for Allen County
AgencyDescriptionFrequency (MHz)ToneModeFCC
American Township Fire - DispatchAmerican Township Fire – Dispatch151.0250
In 156.2325
315 DPLFMNWQHK886
American Township Fire - TrainingAmerican Township Fire – Training154.4000
In 153.8300
627 DPLFMNKBD695
County Fire DispatchCounty Fire Dispatch155.0550243 DPLFMNWNQN437
Shawnee Townthip FD Dispatch/OpsShawnee Townthip Fire Department Dispatch/Operations154.2350
In 150.7900
412 DPLFMNKQK599

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Allen County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Allen County FireCounty fireground (used as needed)866.1750CSQFM—
Allen County FireCounty fireground (used as needed)866.5375CSQFM—
Allen County FireCounty fireground (used as needed)867.3125CSQFM—
Allen County FireCounty fireground (used as needed)868.3125CSQFM—
Allen County FireCounty fireground (used as needed)868.5750CSQFM—

EMS Dispatch

EMS Dispatch frequencies for Allen County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS AgenciesAllen County EMS Dispatch155.0550243 DPLFMNWNQN437
EMS AgenciesDelphos EMS Paging155.0550136.5 PLFMN—

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Allen County FireEast – Dispatch/Operations55091585D
Allen County FireWest – Dispatch/Operations55211591D
Allen County FireShawnee Twp Fire5532159cD
Allen County FireLanding Zone operations55251595D
Allen County FireLanding Zone operations55291599D
Allen County EMSLima-Allen County Paramedics (LACP)55051581D
Allen County EMSLifeflight Transport5514158aD
Allen County HospitalBlanchard Valley Regional Health Center -- Bluffton Campus59743e95fD

Nearest trunked radio sites

Distances are measured from the center of Amanda.

Lima · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 28 (hex 1C) · NAC 34B · about 9 mi away
Control 774.45625, 774.78125
Voice 769.53125, 770.58125, 773.80625, 774.05625, 851.7, 851.9625, 853.2625, 853.6375, 854.1875, 856.6625
Wapakoneta · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 1 · Site 22 (hex 16) · NAC 345 · about 13 mi away
Control 771.50625, 774.30625
Voice 769.35625, 769.70625, 770.03125, 770.43125, 851.1875, 851.9375, 853.225, 854.0875, 856.1875
Middle Point · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 34 (hex 22) · NAC 349 · about 15 mi away
Control 773.48125, 773.73125
Voice 769.43125, 770.70625, 772.18125, 852.2375, 852.75, 855.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Amanda?

We do not have a fire dispatch channel listed specifically for Amanda. The county-level fire dispatch channels in the same county: American Township Fire - Dispatch 151.0250 MHz, narrow FM, 315 DPL; American Township Fire - Training 154.4000 MHz, narrow FM, 627 DPL; County Fire Dispatch 155.0550 MHz, narrow FM, 243 DPL; Shawnee Townthip FD Dispatch/Ops 154.2350 MHz, narrow FM, 412 DPL.

What frequency does EMS or the ambulance service use in Amanda?

We do not have a EMS dispatch channel listed specifically for Amanda. The county-level EMS dispatch channels in the same county: EMS Agencies 155.0550 MHz, narrow FM, 243 DPL.

Do fire departments and EMS use a trunked radio system in Amanda?

Yes. The county-level systems that cover Amanda are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Amanda?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Amanda?

For Amanda, start with the Lima site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 774.45625, 774.78125 MHz. Program a control channel first; the scanner finds the voice channels from it.