About Jackson Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Jackson: Ashland City Fire Dispatch 154.1450 MHz, narrow FM, 141.3 PL; Ashland County Fire 151.2200 MHz, narrow FM, 123.0 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Ashland County Fire talkgroup 6004 (hex 1774).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Jackson, start with the Ashland site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 8 miles away. Its control channels: 773.43125, 774.80625 MHz.
Data updated .
Ashland County channels that also cover Jackson
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ashland City Fire Dispatch | Ashland City Fire Dispatch | 154.1450 In 151.2650 | 141.3 PL | FMN | KQI229 |
| Ashland County Fire | Ashland County Fire – Dispatch | 151.2200 In 154.0700 | 123.0 PL | FMN | WQEN323 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| North Fireground Fire | North Fireground | 150.7900 | 94.8 PL | FMN | KNNT805 |
| South Fireground Fire | South Fireground | 150.1000 | 94.8 PL | FMN | KNNT805 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ashland County Fire | Fire Paging | 6004 | 1774 | D |
| Ashland County Fire | Ashland County Fire – Dispatch | 6021 | 1785 | D |
| Ashland County Fire | Fire Operations | 6024 | 1788 | D |
| Ashland County Fire | Ashland County Fire – Tactical Channel | 6033 | 1791 | D |
| Ashland County Fire | Ashland County Fire – Tactical Channel | 6036 | 1794 | D |
| Ashland County Hospital | Samaritan Regional Health Systems | 59736 | e958 | D |
Nearest trunked radio sites
Distances are measured from the center of Jackson.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Jackson?
We do not have a fire dispatch channel listed specifically for Jackson. The county-level fire dispatch channels in the same county: Ashland City Fire Dispatch 154.1450 MHz, narrow FM, 141.3 PL; Ashland County Fire 151.2200 MHz, narrow FM, 123.0 PL.
Do fire departments and EMS use a trunked radio system in Jackson?
Yes. The county-level systems that cover Jackson are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Jackson?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Jackson?
For Jackson, start with the Ashland site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 773.43125, 774.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.