Skip to content

Pease Fire and EMS Frequencies

We do not have frequencies listed specifically for Pease in Belmont County, Ohio yet. Countywide channels for Belmont County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kirkwood (Bridgeport) (Ohio MARCS-IP: Multi-Agency Radio Communications), about 3 miles away.

About Pease Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pease: County Fire Dispatch 155.7600 MHz, narrow FM, no tone. Trunked: Belmont County, for example Fire and EMS talkgroup 1501 (hex 5dd).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Belmont County: 31 talkgroups; Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pease, start with the Kirkwood (Bridgeport) site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 3 miles away. Its control channels: 771.43125, 773.58125 MHz.

Data updated .

Belmont County channels that also cover Pease

Fire Dispatch

Fire Dispatch frequencies for Belmont County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire DispatchCounty Fire Dispatch155.7600FMNWPLX421

Hospitals & Medical

Hospitals & Medical frequencies for Belmont County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS OperationsBelmont Community Hospital155.2800FMWZC520
EMS OperationsEMS to Hospital155.3400FM—

Belmont County

Belmont County talkgroups
AgencyDescriptionTalkgroupHexMode
Fire and EMSCounty Fire Dispatch15015ddD
Fire and EMSFire and EMS – Tactical Channel – Bridgeport Fire Department (stations 19, 21, 41)15fD
Fire and EMSFire and EMS – Tactical Channel – Barnesville Fire Department (stations 11, 12)15035dfD
Fire and EMSFire and EMS – Tactical Channel – Neffs Fire Department (station 32)15055e1D
Fire and EMSFire and EMS – Tactical Channel – Martins Ferry Fire Department (station 28)15095e5D
Fire and EMSFire and EMS – Tactical Channel – Shadyside Fire Department (stations 33, 35, 36, 38)15115e7D
Fire and EMSFire and EMS – Tactical Channel – Cumberland Trail Fire Department (station 23)15135e9D
Fire and EMSCounty Fire tactical (stations 14, 15, 37)15155ebD
Fire and EMSCounty Fire tactical (stations 17, 18, 31)15175edD
Fire and EMSCounty Fire tactical (stations 24, 26, 27)15195efD
Fire and EMSCounty Fire tactical (stations 13, 22, 29, 39)15215f1D
Fire and EMSCounty Fire tactical (station 16)15235f3D
Fire and EMSCounty Fire tactical15255f5D
Fire and EMSCounty Fire tactical15275f7D
Fire and EMSCounty Fire tactical15295f9D
Fire and EMSCounty Fire tactical15315fbD
Fire and EMSCounty Fire tactical15335fdD
Fire and EMSCounty Fire tactical15355ffD
Fire and EMSCounty Fire tactical (helicopter landings, training)1537601D
Fire and EMSFire / Poilce – Mutual Aid1541605D
Fire and EMSTanker Task Force Operations1543607D
Fire and EMSCounty Emergency1559617D
Fire and EMSFire and EMS – Tactical Channel190176dD
Fire and EMSCountywide Fire191977fD
Fire and EMSFire administrative (Chiefs)1539603D
HospitalBarnesville Hospital190376fD
HospitalSt Clairsville Neighborhood Hospital1905771D
HospitalEast Ohio Regional Hospital1907773D
HospitalWheeling Hospital1909775D
HospitalOhio Valley Medical Center1911777D
HospitalReynolds Memorial Hospital191577bD

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Belmont County Fire BackupSunset Heights Volunteer Fire Department80071f47D
Belmont County HospitalBarnesville Hospital59956ea34D
Belmont County HospitalBelmont Community Hospital59960ea38D
Belmont County HospitalEast Ohio Regional Hospital59963ea3bD

Nearest trunked radio sites

Distances are measured from the center of Pease.

Kirkwood (Bridgeport) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 20 (hex 14) · NAC 34A · about 3 mi away
Control 771.43125, 773.58125
Voice 770.85625, 771.13125, 851.7125, 852.5875
Adena · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 48 (hex 30) · NAC 34F · about 13 mi away
Control 772.98125, 774.40625
Voice 771.23125, 771.68125, 771.95625, 772.55625, 853.325, 853.8875, 856.1375
Belmont County · Belmont County
RFSS 1 · Site 1 (hex 1) · NAC 691 · about 13 mi away
Control 851.4375, 851.7625, 853.45, 853.7
Voice 851.2125, 852.775, 853.85
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pease?

We do not have a fire dispatch channel listed specifically for Pease. The county-level fire dispatch channels in the same county: County Fire Dispatch 155.7600 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Pease?

Yes. The county-level systems that cover Pease are Fire and EMS talkgroups are listed for Belmont County: 31 talkgroups; Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pease?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pease?

For Pease, start with the Kirkwood (Bridgeport) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 771.43125, 773.58125 MHz. Program a control channel first; the scanner finds the voice channels from it.