Skip to content

Fox Fire and EMS Frequencies

We do not have frequencies listed specifically for Fox in Carroll County, Ohio yet. Countywide channels for Carroll County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kensington (Ohio MARCS-IP: Multi-Agency Radio Communications), about 9 miles away.

About Fox Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Fox: Fire and EMS 453.2625 MHz, FM, 114.8 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Carroll County Fire talkgroup 9503 (hex 251f).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Fox, start with the Kensington site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 9 miles away. Its control channels: 771.03125, 772.75625 MHz.

Data updated .

Carroll County channels that also cover Fox

Fire Dispatch

Fire Dispatch frequencies for Carroll County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSGreat Trail Fire District453.2625
In 458.2625
114.8 PLFMWQGV606
Fire and EMSFire/EMS Countywide Dispatch460.3250
In 465.3250
243 DPLFMNWQIP957

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Carroll County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSFire and EMS – Fire Ground453.3625306 DPLFMNWQIP957
Fire and EMSFire and EMS – Fire Ground453.4875412 DPLFMNWQIP957
Fire and EMSFire and EMS – Fire Ground458.5625306 DPLFMNWQIP957
Fire and EMSFire and EMS – Fire Ground458.7500412 DPLFMNWQIP957
Fire and EMSFire/EMS Mechanicstown Site460.0875
In 465.0675
331 DPLFMNWQIP957
Fire and EMSFire/EMS Perrysville Site460.1125
In 465.1125
263 DPLFMNWQIP957
Fire and EMSFire/EMS Carrollton Site460.3000
In 465.3000
251 DPLFMNWQIP957
Fire and EMSFire/EMS Dellroy Site460.3750
In 465.3750
251 DPLFMNWQIP957

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Carroll County FireCarroll County Fire – Dispatch – Tone outs9503251fD
Carroll County FireSouth Fire Dispatch9599257fD
Carroll County FireNorth Fire Dispatch9821265dD
Carroll County FireFire Paging995726e5D
Carroll County FireCarroll County Fire – Tactical Channel9500251cD
Carroll County FireAugusta Twp (17) Fire9615258fD
Carroll County FireLoudon Twp (15) and Perry Twp (18) Fire995326e1D

Nearest trunked radio sites

Distances are measured from the center of Fox.

Kensington · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 10 (hex A) · NAC 348 · about 9 mi away
Control 771.03125, 772.75625
Voice 770.60625, 851.8125, 852.85, 857.6375
Lisbon · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 9 (hex 9) · NAC 348 · about 13 mi away
Control 772.80625, 774.20625
Voice 769.15625, 772.48125, 853.3375, 857.0375
Germano · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 36 (hex 24) · NAC 343 · about 13 mi away
Control 773.15625, 773.43125
Voice 772.05625, 852.375, 852.9, 852.95, 854.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Fox?

We do not have a fire dispatch channel listed specifically for Fox. The county-level fire dispatch channels in the same county: Fire and EMS 453.2625 MHz, FM, 114.8 PL.

Do fire departments and EMS use a trunked radio system in Fox?

Yes. The county-level systems that cover Fox are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Fox?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Fox?

For Fox, start with the Kensington site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 771.03125, 772.75625 MHz. Program a control channel first; the scanner finds the voice channels from it.