About Butler Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Butler: County Fire/EMS dispatch 151.2650 MHz, narrow FM, 162.2 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Darke County Fire talkgroup 14501 (hex 38a5).
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Butler, start with the Eaton (New Madison) site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 5 miles away. Its control channels: 771.98125, 774.28125 MHz.
Data updated .
Darke County channels that also cover Butler
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire/EMS dispatch | County Fire/EMS dispatch | 151.2650 In 159.3000 | 162.2 PL | FMN | WBQI356 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Darke County Fire | Greenville Township Fire/EMS | 151.4525 | 703 DPL | FMN | WQGT383 |
| Darke County Fire | Fire/EMS tactical | 153.8300 | CSQ | FMN | WSB923 |
| Darke County Fire | Fire/EMS tactical | 154.0700 | 162.2 PL | FMN | KBO791 |
| Darke County Fire | Fire/EMS tactical | 154.1600 | 162.2 PL | FMN | WSB923 |
| Darke County Fire | Fire/EMS tactical | 154.2650 | 162.2 PL | FMN | WSB923 |
| Darke County Fire | Fire/EMS tactical | 154.2800 | CSQ | FMN | WSB923 |
| Darke County Fire | Fire/EMS tactical | 154.2950 | CSQ | FMN | WSB923 |
| Darke County Fire | Fire/EMS tactical | 155.2200 | 162.2 PL | FMN | WSB923 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Darke County Hospital | EMS to Wayne Hospital | 155.3400 | CSQ | FMN | WSB923 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Darke County Fire | Darke County Fire/EMS Dispatch | 14501 | 38a5 | D |
| Darke County Fire | County Fire/EMS Paging | 14513 | 38b1 | D |
| Darke County EMS | Tri-Village Rescue Paging | 14520 | 38b8 | D |
| Darke County Hospital | Wayne Hospital | 14517 | 38b5 | D |
Nearest trunked radio sites
Distances are measured from the center of Butler.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Butler?
We do not have a fire dispatch channel listed specifically for Butler. The county-level fire dispatch channels in the same county: County Fire/EMS dispatch 151.2650 MHz, narrow FM, 162.2 PL.
Do fire departments and EMS use a trunked radio system in Butler?
Yes. The county-level systems that cover Butler are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Butler?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Butler?
For Butler, start with the Eaton (New Madison) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 771.98125, 774.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.