About Pancoastburg Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Pancoastburg: County Fire/EMS Dispatch 154.6950 MHz, narrow FM, 023 DPL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Fayette County Fire talkgroup 17005 (hex 426d).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pancoastburg, start with the Washington Court House site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 11 miles away. Its control channels: 773.43125, 773.68125 MHz.
Data updated .
Fayette County channels that also cover Pancoastburg
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire/EMS Dispatch | County Fire/EMS Dispatch (and outdoor warning siren controll) | 154.6950 In 159.3000 | 023 DPL | FMN | WQCA358 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson Township Fire TAC | Jefferson Township Fire Tactical | 154.2050 | 103.5 PL | FMN | WQDT898 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fayette County Fire | Fire-Sheriff common | 154.1450 | 123.0 PL | FMN | WNDF837 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fayette County Fire | Fire Alert Paging (Simulcast on 154.695) | 17005 | 426d | D |
| Fayette County Fire | County Fire Dispatch | 17012 | 4274 | D |
| Fayette County Fire | County Fireground | 17004 | 426c | D |
| Fayette County Fire | Wayne Twp Fireground | 17027 | 4283 | D |
| Fayette County Fire | Concord-Greene Fireground | 17032 | 4288 | D |
| Fayette County EMS | County EMS Dispatch | 17014 | 4276 | D |
| Fayette County Hospital | Fayette County Memorial Hospital | 59904 | ea00 | D |
Nearest trunked radio sites
Distances are measured from the center of Pancoastburg.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pancoastburg?
We do not have a fire dispatch channel listed specifically for Pancoastburg. The county-level fire dispatch channels in the same county: County Fire/EMS Dispatch 154.6950 MHz, narrow FM, 023 DPL.
Do fire departments and EMS use a trunked radio system in Pancoastburg?
Yes. The county-level systems that cover Pancoastburg are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pancoastburg?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pancoastburg?
For Pancoastburg, start with the Washington Court House site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 773.43125, 773.68125 MHz. Program a control channel first; the scanner finds the voice channels from it.