About Gorham Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Gorham: County Fire - Dispatch 154.3100 MHz, narrow FM, 107.2 PL. Trunked: Northwest Ohio Regional Public Safety System, for example Fulton County Fire Control talkgroup 10584 (hex 2958).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Northwest Ohio Regional Public Safety System: 4 talkgroups; Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Gorham, start with the Kunkle site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 11 miles away. Its control channels: 772.00625, 772.33125 MHz.
Data updated .
Fulton County channels that also cover Gorham
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire - Dispatch | County Fire – Dispatch | 154.3100 | 107.2 PL | FMN | KIU816 |
Northwest Ohio Regional Public Safety System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fulton County Fire Control | County Fire Dispatch and County Siren Activation | 10584 | 2958 | D |
| Fulton County Fire Control | County Fire – En Route | 10700 | 29cc | D |
| Fulton County Fire Control | Morenci Fire | 10701 | 29cd | D |
| Fulton County Countywide Ops | Fulton Medical Center | 11704 | 2db8 | D |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fulton County Hospital | Fulton County Health Center | 59757 | e96d | D |
Nearest trunked radio sites
Distances are measured from the center of Gorham.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Gorham?
We do not have a fire dispatch channel listed specifically for Gorham. The county-level fire dispatch channels in the same county: County Fire - Dispatch 154.3100 MHz, narrow FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in Gorham?
Yes. The county-level systems that cover Gorham are Fire and EMS talkgroups are listed for Northwest Ohio Regional Public Safety System: 4 talkgroups; Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Gorham?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Gorham?
For Gorham, start with the Kunkle site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 772.00625, 772.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.