About Auburn Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Auburn: Fire Dispatch 460.4375 MHz, narrow FM, 114.8 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Geauga County Fire/EMS/Hospital talkgroup 19525 (hex 4c45).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups; Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Auburn, start with the Chagrin Falls site of GCRCN (Greater Cleveland Radio Communications Network), about 7 miles away. Its control channels: 854.2875, 855.2375 MHz.
Data updated .
Auburn trunked talkgroups
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Geauga County Fire/EMS/Hospital | Auburn / Parkman / Troy Fire Dispatch | 19525 | 4c45 | D |
| Auburn Fire | Auburn Fire A | 19600 | 4c90 | D |
| Auburn Fire | Auburn Fire B | 19601 | 4c91 | D |
Geauga County channels that also cover Auburn
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire Dispatch | County Fire Alerting | 460.4375 | 114.8 PL | FMN | WQYP610 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Geauga County Fire/EMS/Hospital | Geauga Co Fire Investigative Unit | 19607 | 4c97 | D |
| Geauga County Fire/EMS/Hospital | Geauga Medical Center ER | 19530 | 4c4a | D |
| Geauga County Fire/EMS/Hospital | UH Geauga Medical Center | 59759 | e96f | D |
Nearest trunked radio sites
Distances are measured from the center of Auburn.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Auburn?
We do not have a fire dispatch channel listed specifically for Auburn. The county-level fire dispatch channels in the same county: Fire Dispatch 460.4375 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Auburn?
Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Auburn?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Auburn?
For Auburn, start with the Chagrin Falls site of GCRCN (Greater Cleveland Radio Communications Network). Its control channels are 854.2875, 855.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Auburn fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Auburn are marked encrypted.