About Amanda Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Amanda: Hancock County Fire Page 155.5350 MHz, narrow FM, 162 DPL; Hancock County Fire Page Backup 155.4300 MHz, narrow FM, 141.3 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Hancock County Fire talkgroup 22003 (hex 55f3).
- 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Amanda, start with the Carey site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 7 miles away. Its control channels: 774.18125, 774.70625 MHz.
Data updated .
Hancock County channels that also cover Amanda
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hancock County Fire Page | Hancock County Fire Page (Multicast w/ MARCS TGID 38256) | 155.5350 In 158.9700 | 162 DPL | FMN | KNDQ906 |
| Hancock County Fire Page Backup | Hancock County Fire Page Backup (old Findlay Police Department repeater) | 155.4300 In 154.8900 | 141.3 PL | FMN | KQC759 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hancock County Fire | County fireground | 866.1750 | CSQ | FM | — |
| Hancock County Fire | County fireground | 866.5375 | CSQ | FM | — |
| Hancock County Fire | County fireground | 867.3125 | CSQ | FM | — |
| Hancock County Fire | County fireground | 868.3125 | CSQ | FM | — |
| Hancock County Fire | County fireground | 868.5750 | CSQ | FM | — |
| Hancock County Fire - Fireground | Hancock County Fire – Fireground | 154.1450 | 141.3 PL | FMN | KNNU503 |
| Liberty Township Fire - Fireground | Liberty Township Fire – Fireground | 154.3850 | 141.3 PL | FMN | WPEA913 |
| Union Township VFD - Fireground Fire | Union Township Volunteer Fire Department – Fireground | 154.3700 | 141.3 PL | FMN | KIL628 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hospitals | Blanchard Valley Memorial Hospital – Security/Maintenance | 464.7750 In 469.7750 | 025 DPL | FMN | — |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hancock County Fire | Hancock County Fire – Dispatch | 22003 | 55f3 | D |
| Hancock County Fire | Fire/EMS Paging | 22025 | 5609 | D |
| Hancock County EMS | Hancock County EMS – Dispatch | 59115 | e6eb | D |
Nearest trunked radio sites
Distances are measured from the center of Amanda.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Amanda?
We do not have a fire dispatch channel listed specifically for Amanda. The county-level fire dispatch channels in the same county: Hancock County Fire Page 155.5350 MHz, narrow FM, 162 DPL; Hancock County Fire Page Backup 155.4300 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Amanda?
Yes. The county-level systems that cover Amanda are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Amanda?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Amanda?
For Amanda, start with the Carey site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 774.18125, 774.70625 MHz. Program a control channel first; the scanner finds the voice channels from it.