Skip to content

Cass Fire and EMS Frequencies

We do not have frequencies listed specifically for Cass in Hancock County, Ohio yet. Countywide channels for Hancock County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Findlay (Ohio MARCS-IP: Multi-Agency Radio Communications), about 5 miles away.

About Cass Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cass: Hancock County Fire Page 155.5350 MHz, narrow FM, 162 DPL; Hancock County Fire Page Backup 155.4300 MHz, narrow FM, 141.3 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Hancock County Fire talkgroup 22003 (hex 55f3).

  • 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cass, start with the Findlay site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 5 miles away. Its control channels: 773.53125, 774.28125 MHz.

Data updated .

Hancock County channels that also cover Cass

Fire Dispatch

Fire Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County Fire PageHancock County Fire Page (Multicast w/ MARCS TGID 38256)155.5350
In 158.9700
162 DPLFMNKNDQ906
Hancock County Fire Page BackupHancock County Fire Page Backup (old Findlay Police Department repeater)155.4300
In 154.8900
141.3 PLFMNKQC759

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireCounty fireground866.1750CSQFM—
Hancock County FireCounty fireground866.5375CSQFM—
Hancock County FireCounty fireground867.3125CSQFM—
Hancock County FireCounty fireground868.3125CSQFM—
Hancock County FireCounty fireground868.5750CSQFM—
Hancock County Fire - FiregroundHancock County Fire – Fireground154.1450141.3 PLFMNKNNU503
Liberty Township Fire - FiregroundLiberty Township Fire – Fireground154.3850141.3 PLFMNWPEA913
Union Township VFD - Fireground FireUnion Township Volunteer Fire Department – Fireground154.3700141.3 PLFMNKIL628

Hospitals & Medical

Hospitals & Medical frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
HospitalsBlanchard Valley Memorial Hospital – Security/Maintenance464.7750
In 469.7750
025 DPLFMN—

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireHancock County Fire – Dispatch2200355f3D
Hancock County FireFire/EMS Paging220255609D
Hancock County EMSHancock County EMS – Dispatch59115e6ebD

Nearest trunked radio sites

Distances are measured from the center of Cass.

Findlay · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 31 (hex 1F) · NAC 34E · about 5 mi away
Control 773.53125, 774.28125
Voice 771.33125, 772.20625, 772.45625, 773.03125, 851.675, 852.1625, 853.05, 853.6875, 853.95
Carey · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 32 (hex 20) · NAC 34F · about 17 mi away
Control 774.18125, 774.70625
Voice 770.68125, 772.78125, 773.63125, 852.1875
Bradner · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 14 (hex E) · NAC 34D · about 17 mi away
Control 771.20625, 773.83125
Voice 769.40625, 770.33125, 770.65625, 855.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cass?

We do not have a fire dispatch channel listed specifically for Cass. The county-level fire dispatch channels in the same county: Hancock County Fire Page 155.5350 MHz, narrow FM, 162 DPL; Hancock County Fire Page Backup 155.4300 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Cass?

Yes. The county-level systems that cover Cass are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cass?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cass?

For Cass, start with the Findlay site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 773.53125, 774.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.