About Whiteoak Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Whiteoak: Brushcreek Twp Fire Dispatch 154.4000 MHz, FM, no tone; County Fire Dispatch 33.9400 MHz, FM, no tone; County Fire/EMS Dispatch 154.3400 MHz, FM, 103.5 PL. County-level ems dispatch that covers Whiteoak: Highland County EMS 155.2650 MHz, FM, 110.9 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Highland County Fire talkgroup 24004 (hex 5dc4).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Whiteoak, start with the Mount Orab site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 9 miles away. Its control channels: 773.23125, 773.80625 MHz.
Data updated .
Highland County channels that also cover Whiteoak
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brushcreek Twp Fire Dispatch | Brushcreek Twp Fire Dispatch | 154.4000 | FM | KNAI298 | |
| County Fire Dispatch | County Fire Dispatch | 33.9400 | FM | KNAI204 | |
| County Fire/EMS Dispatch | County Fire/EMS Dispatch | 154.3400 In 150.8050 | 103.5 PL | FM | KKG914 |
| Highland County Fire | Brushcreek Twp Fire Dispatch? | 155.3850 In 150.7900 | FM | WPNT787 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| District 300 Fireground | District 300 Fireground | 155.0800 | FM | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Highland County EMS | County Fire/EMS | 155.2650 | 110.9 PL | FM | KKG914 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greenfield Area Medical Center - EMS to ER | Greenfield Area Medical Center – EMS to ER | 155.3400 | FM | — | |
| Highland District Hospital - EMS to ER | Highland District Hospital – EMS to ER | 155.3400 | FM | KNDZ249 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Highland County Fire | County Fire Dispatch | 24004 | 5dc4 | D |
| Highland County Fire | Lynchburg Area Joint Fire & Ambulance District – Operations | 24006 | 5dc6 | D |
| Highland County Fire | County Fireground | 24008 | 5dc8 | D |
| Highland County Fire | County Fireground | 24012 | 5dcc | D |
| Highland County Fire | County Fireground | 24016 | 5dd0 | D |
| Highland County Fire | Paint Creek Joint Fire District – Operations | 24024 | 5dd8 | D |
| Highland County Hospital | Greenfield Area Medical Center | 59895 | e9f7 | D |
| Highland County Hospital | Highland District Hospital | 59911 | ea07 | D |
Nearest trunked radio sites
Distances are measured from the center of Whiteoak.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Whiteoak?
We do not have a fire dispatch channel listed specifically for Whiteoak. The county-level fire dispatch channels in the same county: Brushcreek Twp Fire Dispatch 154.4000 MHz, FM, no tone; County Fire Dispatch 33.9400 MHz, FM, no tone; County Fire/EMS Dispatch 154.3400 MHz, FM, 103.5 PL; Highland County Fire 155.3850 MHz, FM, no tone.
What frequency does EMS or the ambulance service use in Whiteoak?
We do not have a EMS dispatch channel listed specifically for Whiteoak. The county-level EMS dispatch channels in the same county: Highland County EMS 155.2650 MHz, FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Whiteoak?
Yes. The county-level systems that cover Whiteoak are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Whiteoak?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Whiteoak?
For Whiteoak, start with the Mount Orab site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 773.23125, 773.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.