About Paint Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Paint: Holmes County Fire Dispatch 155.9400 MHz, FM, 167.9 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Holmes County Fire talkgroup 25019 (hex 61bb).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Paint, start with the Sugarcreek site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 4 miles away. Its control channels: 771.75625, 772.68125 MHz.
Data updated .
Holmes County channels that also cover Paint
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Holmes County Fire Dispatch | Holmes County Fire Dispatch | 155.9400 | 167.9 PL | FM | KNFL514 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Holmes County Fire | Holmes County Fire (West) Operations | 154.1750 In 151.1750 | 156.7 PL | FM | WNVH521 |
| Holmes County Fire | Holmes County Fire (East) Operations | 154.1750 In 151.1750 | 123.0 PL | FM | WNVH521 |
| Holmes County Fireground | Holmes County Fireground | 153.8300 | CSQ | FM | — |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Holmes County Fire | Holmes County Fire – Dispatch | 25019 | 61bb | D |
| Holmes County Fire | Fire Alert | 25033 | 61c9 | D |
| Holmes County Fire | Fire Operations | 25012 | 61b4 | D |
| Holmes County Fire | Fire Operations | 25016 | 61b8 | D |
| Holmes County Fire | Fire Operations | 25023 | 61bf | D |
| Holmes County Hospital | Pomerene Hospital | 59768 | e978 | D |
Nearest trunked radio sites
Distances are measured from the center of Paint.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Paint?
We do not have a fire dispatch channel listed specifically for Paint. The county-level fire dispatch channels in the same county: Holmes County Fire Dispatch 155.9400 MHz, FM, 167.9 PL.
Do fire departments and EMS use a trunked radio system in Paint?
Yes. The county-level systems that cover Paint are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Paint?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Paint?
For Paint, start with the Sugarcreek site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 771.75625, 772.68125 MHz. Program a control channel first; the scanner finds the voice channels from it.