About Monroe Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Monroe: Fire/EMS Operations 154.3250 MHz, narrow FM, 162.2 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Knox County Fire talkgroup 27004 (hex 697c).
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Monroe, start with the Knox County (Gilchrist) site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 2 miles away. Its control channels: 853.9, 856.0875 MHz.
Data updated .
Knox County channels that also cover Monroe
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS Operations | County Fire (dispatch) | 154.3250 In 153.8900 | 162.2 PL | FMN | WQWP786 |
| Fire/EMS Operations | Mount Vernon Fire | 159.0450 In 154.3850 | 77.0 PL | FMN | WPSG855 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS Operations | North fireground | 151.1600 In 159.1950 | 77.0 PL | FMN | WQBJ550 |
| Fire/EMS Operations | West fireground | 151.2500 In 155.1150 | 162.2 PL | FMN | WQGH371 |
| Fire/EMS Operations | Mt Vernon (city) fireground | 153.8300 | 77.0 PL | FM | WPQY945 |
| Fire/EMS Operations | East fireground | 154.2950 In 155.1150 | 77.0 PL | FMN | WQEU705 |
| Fire/EMS Operations | Central fireground | 159.2925 In 153.8000 | 77.0 PL | FMN | WPSG855 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS Operations | County Fire (car to car south) | 154.3250 In 153.8900 | 77.0 PL | FMN | WQWP786 |
| Fire/EMS Operations | County Fire (car to car central) | 154.3250 In 153.8900 | 91.5 PL | FMN | WQWP786 |
| Fire/EMS Operations | County Fire (car to car north) | 154.3250 In 153.8900 | 85.4 PL | FMN | WQWP786 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Knox County Fire | Knox County Fire – Dispatch | 27004 | 697c | D |
| Knox County Fire | Fire Operations | 27012 | 6984 | D |
| Knox County Fire | Fire Operations | 27013 | 6985 | D |
| Knox County Fire | Fire Operations | 27016 | 6988 | D |
| Knox County Fire | Fire Operations | 27020 | 698c | D |
| Knox County EMS | EMS Operations | 27008 | 6980 | D |
Nearest trunked radio sites
Distances are measured from the center of Monroe.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Monroe?
We do not have a fire dispatch channel listed specifically for Monroe. The county-level fire dispatch channels in the same county: Fire/EMS Operations 154.3250 MHz, narrow FM, 162.2 PL.
Do fire departments and EMS use a trunked radio system in Monroe?
Yes. The county-level systems that cover Monroe are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Monroe?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Monroe?
For Monroe, start with the Knox County (Gilchrist) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 853.9, 856.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.