About Columbia Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Columbia: Meigs County Fire - Chester tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Longbottom tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Pomeroy tower 453.1000 MHz, FM, 023 DPL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Meigs County Fire talkgroup 33003 (hex 80eb).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Columbia, start with the McArthur (Zaleski) site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 9 miles away. Its control channels: 772.63125, 772.93125 MHz.
Data updated .
Meigs County channels that also cover Columbia
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meigs County Fire - Chester tower | Meigs County Fire – Chester tower | 453.1000 In 458.1000 | 023 DPL | FM | WNZR611 |
| Meigs County Fire - Longbottom tower | Meigs County Fire – Longbottom tower | 453.1000 In 458.1000 | 023 DPL | FM | WNZR611 |
| Meigs County Fire - Pomeroy tower | Meigs County Fire – Pomeroy tower | 453.1000 In 458.1000 | 023 DPL | FM | WNZR611 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meigs County Fire | Meigs Co EMA | 453.9250 In 458.9250 | 054 DPL | FM | WPFX411 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Meigs County Fire | Meigs County Fire – Dispatch | 33003 | 80eb | D |
| Meigs County Fire | Meigs County Fire – Tactical Channel / Operations | 33016 | 80f8 | D |
| Meigs County EMS | Meigs County EMS – Dispatch | 33000 | 80e8 | D |
| Meigs County EMS | Meigs County EMS – Alternate | 33009 | 80f1 | D |
Nearest trunked radio sites
Distances are measured from the center of Columbia.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Columbia?
We do not have a fire dispatch channel listed specifically for Columbia. The county-level fire dispatch channels in the same county: Meigs County Fire - Chester tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Longbottom tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Pomeroy tower 453.1000 MHz, FM, 023 DPL.
Do fire departments and EMS use a trunked radio system in Columbia?
Yes. The county-level systems that cover Columbia are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Columbia?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Columbia?
For Columbia, start with the McArthur (Zaleski) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 772.63125, 772.93125 MHz. Program a control channel first; the scanner finds the voice channels from it.