Skip to content

Olive Fire and EMS Frequencies

We do not have frequencies listed specifically for Olive in Meigs County, Ohio yet. Countywide channels for Meigs County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Portland (Coolville) (Ohio MARCS-IP: Multi-Agency Radio Communications), about 2 miles away.

About Olive Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Olive: Meigs County Fire - Chester tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Longbottom tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Pomeroy tower 453.1000 MHz, FM, 023 DPL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Meigs County Fire talkgroup 33003 (hex 80eb).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Olive, start with the Portland (Coolville) site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 2 miles away. Its control channels: 858.9875, 859.9875 MHz.

Data updated .

Meigs County channels that also cover Olive

Fire Dispatch

Fire Dispatch frequencies for Meigs County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meigs County Fire - Chester towerMeigs County Fire – Chester tower453.1000
In 458.1000
023 DPLFMWNZR611
Meigs County Fire - Longbottom towerMeigs County Fire – Longbottom tower453.1000
In 458.1000
023 DPLFMWNZR611
Meigs County Fire - Pomeroy towerMeigs County Fire – Pomeroy tower453.1000
In 458.1000
023 DPLFMWNZR611

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Meigs County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meigs County FireMeigs Co EMA453.9250
In 458.9250
054 DPLFMWPFX411

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Meigs County FireMeigs County Fire – Dispatch3300380ebD
Meigs County FireMeigs County Fire – Tactical Channel / Operations3301680f8D
Meigs County EMSMeigs County EMS – Dispatch3300080e8D
Meigs County EMSMeigs County EMS – Alternate3300980f1D

Nearest trunked radio sites

Distances are measured from the center of Olive.

Portland (Coolville) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 56 (hex 38) · NAC 347 · about 2 mi away
Control 858.9875, 859.9875
Voice 853.3, 853.5, 853.975
McKenzie Ridge (Racine) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 54 (hex 36) · NAC 345 · about 9 mi away
Control 770.83125, 771.95625
Voice 769.35625, 852.05, 853.225, 856.1875
Shade (Albany) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 57 (hex 39) · NAC 348 · about 13 mi away
Control 772.08125, 772.68125
Voice 771.80625, 852.75, 853.3375, 853.95
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Olive?

We do not have a fire dispatch channel listed specifically for Olive. The county-level fire dispatch channels in the same county: Meigs County Fire - Chester tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Longbottom tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Pomeroy tower 453.1000 MHz, FM, 023 DPL.

Do fire departments and EMS use a trunked radio system in Olive?

Yes. The county-level systems that cover Olive are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Olive?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Olive?

For Olive, start with the Portland (Coolville) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 858.9875, 859.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.