Skip to content

Bloom Fire and EMS Frequencies

We do not have frequencies listed specifically for Bloom in Morgan County, Ohio yet. Countywide channels for Morgan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Jesse Owens SP (Cumberland) (Ohio MARCS-IP: Multi-Agency Radio Communications), about 8 miles away.

About Bloom Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bloom: Fire/EMS Operations 33.6800 MHz, FM, no tone. County-level ems dispatch that covers Bloom: Fire/EMS Operations 155.2200 MHz, FM, 103.5 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Morgan County Fire talkgroup 36020 (hex 8cb4).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bloom, start with the Jesse Owens SP (Cumberland) site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 8 miles away. Its control channels: 774.13125, 774.14375 MHz.

Data updated .

Morgan County channels that also cover Bloom

Fire Dispatch

Fire Dispatch frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS OperationsMorgan County Fire Dispatch (including Stockport, Reinersville, Malta-McConnelsville, Chesterhill and Center Twp)33.6800FMKBH343
Fire/EMS OperationsMalta-McConnellsville Fire Dispatch154.3700
In 150.8050
343 DPLFMWPUD591

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS OperationsMorgan County Fire (including Malta-McConnellsville, Chesterhill, etc.)33.8600146.2 PLFMKBH343

EMS Dispatch

EMS Dispatch frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS OperationsMalta-McConnellsville Rescue155.2200103.5 PLFMKNGU730

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Morgan County FireFire / EMS Dispatch360208cb4D
Morgan County FireMorgan County Fire – Tactical Channel360268cbaD
Morgan County FireChesterhille Fire360128cacD
Morgan County FireMalta-McConnellsville Fire360248cb8D
Morgan County EMSMorgan County EMS – Tactical Channel360298cbdD

Nearest trunked radio sites

Distances are measured from the center of Bloom.

Jesse Owens SP (Cumberland) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 24 (hex 18) · NAC 344 · about 8 mi away
Control 774.13125, 774.14375
Voice 772.13125, 772.14375, 773.45625, 773.46875
Duncan Falls (Philo) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 15 (hex F) · NAC 34E · about 8 mi away
Control 770.83125, 771.08125
Voice 769.68125, 770.08125, 851.775, 852.275
Wolf Creek · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 33 (hex 21) · NAC 340 · about 10 mi away
Control 770.75625, 771.00625
Voice 770.50625, 857.7375, 858.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bloom?

We do not have a fire dispatch channel listed specifically for Bloom. The county-level fire dispatch channels in the same county: Fire/EMS Operations 33.6800 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Bloom?

We do not have a EMS dispatch channel listed specifically for Bloom. The county-level EMS dispatch channels in the same county: Fire/EMS Operations 155.2200 MHz, FM, 103.5 PL.

Do fire departments and EMS use a trunked radio system in Bloom?

Yes. The county-level systems that cover Bloom are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bloom?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bloom?

For Bloom, start with the Jesse Owens SP (Cumberland) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 774.13125, 774.14375 MHz. Program a control channel first; the scanner finds the voice channels from it.