About Marion Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Marion: Fire and EMS 33.9000 MHz, FM, no tone. County-level ems dispatch that covers Marion: Fire and EMS 154.0850 MHz, narrow FM, 173.8 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Noble County Fire talkgroup 37505 (hex 9281).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Marion, start with the Lewisville site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 8 miles away. Its control channels: 771.63125, 772.10625 MHz.
Data updated .
Noble County channels that also cover Marion
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | Noble County Fire dispatch (including Belle Valley, Caldwell, and Summerfield) | 33.9000 | FM | KNFQ946 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | United Ambulance Dispatch | 154.0850 In 159.3000 | 173.8 PL | FMN | KNJU589 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | United Ambulance Operations | 155.1600 | 173.8 PL | FMN | KNJU589 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Noble County Fire | Noble County Fire – Dispatch | 37505 | 9281 | D |
| Noble County EMS | Noble County EMS – Dispatch | 37504 | 9280 | D |
Nearest trunked radio sites
Distances are measured from the center of Marion.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Marion?
We do not have a fire dispatch channel listed specifically for Marion. The county-level fire dispatch channels in the same county: Fire and EMS 33.9000 MHz, FM, no tone.
What frequency does EMS or the ambulance service use in Marion?
We do not have a EMS dispatch channel listed specifically for Marion. The county-level EMS dispatch channels in the same county: Fire and EMS 154.0850 MHz, narrow FM, 173.8 PL.
Do fire departments and EMS use a trunked radio system in Marion?
Yes. The county-level systems that cover Marion are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Marion?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Marion?
For Marion, start with the Lewisville site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 771.63125, 772.10625 MHz. Program a control channel first; the scanner finds the voice channels from it.