About Brimfield Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Brimfield: Portage County Fire 151.4750 MHz, narrow FM, 210.7 PL; Randolph Twp Fire Dispatch 154.8000 MHz, narrow FM, 152 DPL; Suffield Twp Fire Dispatch 153.8000 MHz, FM, 141.3 PL. County-level ems dispatch that covers Brimfield: EMS Agencies 154.0100 MHz, FM, 151.4 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Brimfield Fire talkgroup 40546 (hex 9e62).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup; Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Brimfield, start with the KSU (Kent) site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 4 miles away. Its control channels: 853.5, 856.2625 MHz.
Data updated .
Brimfield trunked talkgroups
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Brimfield Fire | Brimfield Fire Dispatch | 40546 | 9e62 | D |
Portage County channels that also cover Brimfield
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Portage County Fire | Deerfield/Windham/Paris/Brimfield/Palmyra/Edinburg Fire Dispatch | 151.4750 In 158.8950 | 210.7 PL | FMN | — |
| Portage County Fire | Hiram/Garrettsville Freedom Nelson JFD Dispatch | 154.0100 In 159.2550 | 151.4 PL | FM | KVP666 |
| Randolph Twp Fire Dispatch | Randolph Twp Fire Dispatch | 154.8000 In 159.1200 | 152 DPL | FMN | KUZ770 |
| Suffield Twp Fire Dispatch | Suffield Twp Fire Dispatch | 153.8000 In 159.4200 | 141.3 PL | FM | KNCR991 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | Community Ambulance | 154.0100 In 159.2550 | 151.4 PL | FM | — |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Portage County Fire | Ravenna City Fire Dispatch | 40543 | 9e5f | D |
| Portage County Fire | Ravenna City / Ravenna Twp Fire Alert | 40571 | 9e7b | D |
| Portage County Fire | Ravenna Twp Fire Alert | 40572 | 9e7c | D |
| Portage County Hospital | UHHS Portage Medical Center | 59814 | e9a6 | D |
Nearest trunked radio sites
Distances are measured from the center of Brimfield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Brimfield?
We do not have a fire dispatch channel listed specifically for Brimfield. The county-level fire dispatch channels in the same county: Portage County Fire 151.4750 MHz, narrow FM, 210.7 PL; Randolph Twp Fire Dispatch 154.8000 MHz, narrow FM, 152 DPL; Suffield Twp Fire Dispatch 153.8000 MHz, FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Brimfield?
We do not have a EMS dispatch channel listed specifically for Brimfield. The county-level EMS dispatch channels in the same county: EMS Agencies 154.0100 MHz, FM, 151.4 PL.
Do fire departments and EMS use a trunked radio system in Brimfield?
Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Brimfield?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Brimfield?
For Brimfield, start with the KSU (Kent) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 853.5, 856.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Brimfield fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Brimfield are marked encrypted.