Skip to content

Shalersville Fire and EMS Frequencies

We do not have frequencies listed specifically for Shalersville in Portage County, Ohio yet. Countywide channels for Portage County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Shalersville (Ohio MARCS-IP: Multi-Agency Radio Communications), about 2 miles away.

About Shalersville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Shalersville: Portage County Fire 151.4750 MHz, narrow FM, 210.7 PL; Randolph Twp Fire Dispatch 154.8000 MHz, narrow FM, 152 DPL; Suffield Twp Fire Dispatch 153.8000 MHz, FM, 141.3 PL. County-level ems dispatch that covers Shalersville: EMS Agencies 154.0100 MHz, FM, 151.4 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Portage County Fire talkgroup 40543 (hex 9e5f).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Shalersville, start with the Shalersville site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 2 miles away. Its control channels: 772.70625, 773.58125 MHz.

Data updated .

Portage County channels that also cover Shalersville

Fire Dispatch

Fire Dispatch frequencies for Portage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Portage County FireDeerfield/Windham/Paris/Brimfield/Palmyra/Edinburg Fire Dispatch151.4750
In 158.8950
210.7 PLFMN—
Portage County FireHiram/Garrettsville Freedom Nelson JFD Dispatch154.0100
In 159.2550
151.4 PLFMKVP666
Randolph Twp Fire DispatchRandolph Twp Fire Dispatch154.8000
In 159.1200
152 DPLFMNKUZ770
Suffield Twp Fire DispatchSuffield Twp Fire Dispatch153.8000
In 159.4200
141.3 PLFMKNCR991

EMS Dispatch

EMS Dispatch frequencies for Portage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS AgenciesCommunity Ambulance154.0100
In 159.2550
151.4 PLFM—

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Portage County FireRavenna City Fire Dispatch405439e5fD
Portage County FireRavenna City / Ravenna Twp Fire Alert405719e7bD
Portage County FireRavenna Twp Fire Alert405729e7cD
Portage County HospitalUHHS Portage Medical Center59814e9a6D

Nearest trunked radio sites

Distances are measured from the center of Shalersville.

Shalersville · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 20 (hex 14) · NAC 343 · about 2 mi away
Control 772.70625, 773.58125
Voice 769.45625, 771.00625, 771.38125, 773.33125, 851.625, 852.825, 853.325
Portage County Simulcast · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 22 (hex 16) · NAC 34E · about 5 mi away
Control 772.70625, 773.33125, 773.58125, 773.73125
Voice 771.38125, 772.38125, 851.125, 851.425, 852.3875, 853.2125, 853.5875, 853.8
KSU (Kent) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 69 (hex 45) · NAC 340 · about 8 mi away
Control 853.5, 856.2625
Voice 851.3625, 852.7375, 853.05, 853.8, 856.7125, 858.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Shalersville?

We do not have a fire dispatch channel listed specifically for Shalersville. The county-level fire dispatch channels in the same county: Portage County Fire 151.4750 MHz, narrow FM, 210.7 PL; Randolph Twp Fire Dispatch 154.8000 MHz, narrow FM, 152 DPL; Suffield Twp Fire Dispatch 153.8000 MHz, FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Shalersville?

We do not have a EMS dispatch channel listed specifically for Shalersville. The county-level EMS dispatch channels in the same county: EMS Agencies 154.0100 MHz, FM, 151.4 PL.

Do fire departments and EMS use a trunked radio system in Shalersville?

Yes. The county-level systems that cover Shalersville are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Shalersville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Shalersville?

For Shalersville, start with the Shalersville site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 772.70625, 773.58125 MHz. Program a control channel first; the scanner finds the voice channels from it.