About Dover Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Dover: County Fire CH-1 Dispatch 154.2500 MHz, narrow FM, 162.2 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Union County Fire talkgroup 47001 (hex b799).
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Dover, start with the Marysville site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 6 miles away. Its control channels: 774.33125, 774.58125 MHz.
Data updated .
Union County channels that also cover Dover
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire CH-1 Dispatch | County Fire CH-1 Dispatch | 154.2500 | 162.2 PL | FMN | WPBY240 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire Fireground 5 | County Fire Fireground | 154.2800 | CSQ | FMN | WPBY240 |
| County Fire Fireground 6 | County Fire Fireground | 153.8300 | CSQ | FMN | — |
| County Fire Fireground 7 | County Fire Fireground | 154.2650 | CSQ | FMN | — |
| County Fire Ops 2 | County Fire Operations (Marysville runs) | 154.3250 | 127.3 PL | FMN | WPBY240 |
| County Fire Ops 3 | County Fire Operations (County runs) | 154.1750 | 127.3 PL | FMN | WPBY240 |
| County Fire Ops 4 | County Fire Operations | 154.2350 | 162.2 PL | FMN | KQH277 |
| Union County Fire | County EMA Operations (repeater) | 154.0925 In 159.0525 | 136.5 PL | FMN | WPNP519 |
| Union County Fire | County Emergency Mgmt Agency | 155.8050 | CSQ | FMN | WPNP519 |
| Union County Fire | County EMA Operations | 159.3000 | 67.0 PL | FMN | — |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Union County Fire | Fire Paging | 47001 | b799 | D |
| Union County Fire | Union County Fire – Dispatch | 47002 | b79a | D |
| Union County Fire | Fire Operations | 47006 | b79e | D |
| Union County Fire | Fire Operations | 47010 | b7a2 | D |
| Union County Fire | Fire Operations | 47014 | b7a6 | D |
| Union County Fire | Union County Fire – Fire Ground | 47018 | b7aa | D |
| Union County Fire | Union County Fire – Fire Ground | 47022 | b7ae | D |
| Union County Fire | Fire-Police Common | 47034 | b7ba | D |
| Union County Hospital | Fire/EMS to UCMH | 47026 | b7b2 | D |
Nearest trunked radio sites
Distances are measured from the center of Dover.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Dover?
We do not have a fire dispatch channel listed specifically for Dover. The county-level fire dispatch channels in the same county: County Fire CH-1 Dispatch 154.2500 MHz, narrow FM, 162.2 PL.
Do fire departments and EMS use a trunked radio system in Dover?
Yes. The county-level systems that cover Dover are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Dover?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Dover?
For Dover, start with the Marysville site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 774.33125, 774.58125 MHz. Program a control channel first; the scanner finds the voice channels from it.