Skip to content

Hoyt Fire and EMS Frequencies

We do not have frequencies listed specifically for Hoyt in Haskell County, Oklahoma yet. Countywide channels for Haskell County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Gore (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 25 miles away.

About Hoyt Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hoyt: Haskell County Fire 151.0025 MHz, narrow FM, 025 DPL. County-level ems dispatch that covers Hoyt: Haskell County EMS 155.0250 MHz, narrow FM, 186.2 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Haskell County channels that also cover Hoyt

Fire Dispatch

Fire Dispatch frequencies for Haskell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Haskell County FireHaskell County Fire – Dispatch – North151.0025
In 155.8275
025 DPLFMNWPKG690
Haskell County FireHaskell County Fire – Dispatch – South151.0850
In 153.9500
127.3 PLFMNWPKG690

EMS Dispatch

EMS Dispatch frequencies for Haskell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Haskell County EMSHaskell County EMS – Dispatch155.0250
In 151.3925
186.2 PLFMNWRZC685

Nearest trunked radio sites

Distances are measured from the center of Hoyt.

Gore · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 52 (hex 34) · NAC 92E · about 25 mi away
Control 859.2625, 860.2625
Voice 855.9625, 856.2625, 857.2625, 858.2625
Muskogee County · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 53 (hex 35) · NAC 92D · about 31 mi away
Control 852.225, 852.4
Voice 851.15, 851.45, 853.225, 853.5875, 853.8375
Cookson · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 47 (hex 2F) · NAC 92D · about 39 mi away
Control 853.0375, 853.9
Voice 851.0875, 852.275, 852.55, 852.725, 852.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hoyt?

We do not have a fire dispatch channel listed specifically for Hoyt. The county-level fire dispatch channels in the same county: Haskell County Fire 151.0025 MHz, narrow FM, 025 DPL.

What frequency does EMS or the ambulance service use in Hoyt?

We do not have a EMS dispatch channel listed specifically for Hoyt. The county-level EMS dispatch channels in the same county: Haskell County EMS 155.0250 MHz, narrow FM, 186.2 PL.

What scanner do I need to listen to fire and EMS in Hoyt?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Hoyt?

For Hoyt, start with the Gore site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2625, 860.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.