Skip to content

Hanson Fire and EMS Frequencies

We do not have frequencies listed specifically for Hanson in Sequoyah County, Oklahoma yet. Countywide channels for Sequoyah County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cookson (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 17 miles away.

About Hanson Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hanson: Sequoyah County Fire 158.7300 MHz, narrow FM, 114.8 PL. County-level ems dispatch that covers Hanson: Sequoyah County EMS 152.4200 MHz, narrow FM, 712 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Sequoyah County channels that also cover Hanson

Fire Dispatch

Fire Dispatch frequencies for Sequoyah County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sequoyah County FireFire and EMS Dispatch158.7300
In 153.9800
114.8 PLFMNWPNS527

EMS Dispatch

EMS Dispatch frequencies for Sequoyah County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sequoyah County EMSPafford EMS Dispatch152.4200
In 157.6800
712 DPLFMNWQGK648

Nearest trunked radio sites

Distances are measured from the center of Hanson.

Cookson · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 47 (hex 2F) · NAC 92D · about 17 mi away
Control 853.0375, 853.9
Voice 851.0875, 852.275, 852.55, 852.725, 852.875
Gore · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 52 (hex 34) · NAC 92E · about 25 mi away
Control 859.2625, 860.2625
Voice 855.9625, 856.2625, 857.2625, 858.2625
Muskogee County · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 53 (hex 35) · NAC 92D · about 36 mi away
Control 852.225, 852.4
Voice 851.15, 851.45, 853.225, 853.5875, 853.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hanson?

We do not have a fire dispatch channel listed specifically for Hanson. The county-level fire dispatch channels in the same county: Sequoyah County Fire 158.7300 MHz, narrow FM, 114.8 PL.

What frequency does EMS or the ambulance service use in Hanson?

We do not have a EMS dispatch channel listed specifically for Hanson. The county-level EMS dispatch channels in the same county: Sequoyah County EMS 152.4200 MHz, narrow FM, 712 DPL.

What scanner do I need to listen to fire and EMS in Hanson?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Hanson?

For Hanson, start with the Cookson site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 853.0375, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.