About Running Y Ranch Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Running Y Ranch: Klamath County Fire 154.0700 MHz, narrow FM, 192.8 PL. Trunked: Oregon State Radio Project, for example Klamath County Fire talkgroup 40922 (hex 9fda).
- 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
Data updated .
Klamath County channels that also cover Running Y Ranch
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Klamath County Fire | Fire District – Firecom | 154.0700 | 192.8 PL | FMN | KNIQ200 |
| Klamath County Fire | Fire District 2 | 154.4450 | FMN | — | |
| Klamath County Fire | Fire District 4 | 453.7125 | FMN | — | |
| Klamath County Fire | Fire District 5 | 458.7125 | FMN | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Klamath County Fire | Fire District – East County Working | 153.8900 | FMN | WPKF637 | |
| Klamath County Fire | County Fire Tactical | 153.8900 In 154.4150 | 151.4 PL | FMN | KNAW669 |
| Klamath County Fire | Fire District – Central County Working | 153.9500 | FMN | WZU636 | |
| Klamath County Fire | Fire District – North County Working | 154.1750 | FMN | — | |
| Klamath County Fire | Fire District – South County Working (1) | 154.3550 | FMN | KNBL289 | |
| Klamath County Fire | Search and Rescue | 155.1600 | FMN | KTO395 | |
| Klamath County Fire | Fire District – South County Working (2) | 155.8200 | FMN | KON936 |
Oregon State Radio Project
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Klamath County Fire | Klamath County Fire – Dispatch | 40922 | 9fda | T |
Nearest trunked radio sites
Distances are measured from the center of Running Y Ranch.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Running Y Ranch?
We do not have a fire dispatch channel listed specifically for Running Y Ranch. The county-level fire dispatch channels in the same county: Klamath County Fire 154.0700 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Running Y Ranch?
Yes. The county-level systems that cover Running Y Ranch are Fire and EMS talkgroups are listed for Oregon State Radio Project: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Running Y Ranch?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.