About Bedford County Fire and EMS Frequencies
Quick answer: Fire dispatch for Bedford County: County Police/Fire/EMS 453.7875 MHz, narrow FM, 82.5 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Bedford County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Police/Fire/EMS | Fire/EMS Dispatch | 453.7875 In 458.7875 | 82.5 PL | FMN | WQMR401 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Police/Fire/EMS | County Sheriff | 155.4900 | FMN | KNEN598 | |
| County Police/Fire/EMS | Fire Operations | 453.1750 In 458.1750 | NAC 293 | P25 | WQNT809 |
| County Police/Fire/EMS | County Operations | 453.8375 In 458.8375 | NAC 293 | P25 | KCS336 |
| County Police/Fire/EMS | County Operations | 460.3750 In 465.3750 | NAC 293 | P25 | KXM868 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Police/Fire/EMS | EMS Operations | 462.9625 In 467.9625 | NAC 293 | P25 | WQNT809 |
Radio system sites in Bedford County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Bedford County
- Bedford
- Bloomfield
- Broad Top
- Coaldale
- Colerain
- Cumberland Valley
- Defiance
- Earlston
- East Providence
- East St. Clair
- Everett
- Harrison
- Hopewell
- Hyndman
- Juniata
- Kimmel
- King
- Liberty
- Lincoln
- Londonderry
- Mann
- Manns Choice
- Monroe
- Napier
- New Paris
- Pavia
- Pleasantville
- Rainsburg
- Saxton
- Schellsburg
- Snake Spring
- South Woodbury
- Southampton
- St. Clairsville
- Stonerstown
- West Providence
- West St. Clair
- Woodbury
Common questions
What frequency does the fire department use in Bedford County?
Fire dispatch channels listed for Bedford County: County Police/Fire/EMS 453.7875 MHz, narrow FM, 82.5 PL.
What scanner do I need to listen to fire and EMS in Bedford County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Bedford County?
For Bedford County, start with the Martin Hill (BEDF02) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 151.4825, 154.1375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Bedford County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Bedford County are marked encrypted.