About Homeacre-Lyndora Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Homeacre-Lyndora: Butler County Fire/EMS Paging 460.0625 MHz, narrow FM, CSQ. Trunked: ICORRS (Inter County Regional Radio System), for example Butler Co Fire talkgroup 1801 (hex 709).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: ICORRS (Inter County Regional Radio System): 23 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Homeacre-Lyndora, start with the Butler Co Simulcast site of ICORRS (Inter County Regional Radio System), about 2 miles away. Its control channels: 858.0125, 858.5625, 858.9625 MHz.
Data updated .
Butler County channels that also cover Homeacre-Lyndora
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Butler County Fire/EMS Paging | Butler County Fire/EMS Paging | 460.0625 | CSQ | FMN | WRAN557 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Butler County Fire | Fire / EMS Tactical | 769.0063 | 103.5 PL | FMN | WRCL651 |
| Butler County Fire | Fire / EMS Tactical | 769.0438 | 103.5 PL | FMN | WRCL651 |
| Butler County Fire | Fire / EMS Tactical | 774.9313 | 103.5 PL | FMN | WRCL651 |
ICORRS (Inter County Regional Radio System)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Butler Co Fire | Butler Co Fire – Dispatch | 1801 | 709 | T |
| Butler Co Fire | North | 1802 | 70a | T |
| Butler Co Fire | South | 1803 | 70b | T |
| Butler Co Fire | Fire Operations | 1804 | 70c | T |
| Butler Co Fire | Fire Operations | 1805 | 70d | T |
| Butler Co Fire | Fire Operations | 1806 | 70e | T |
| Butler Co Fire | Fire Operations | 1807 | 70f | T |
| Butler Co Fire | Fire Operations | 1808 | 710 | T |
| Butler Co Fire | Fire Operations | 1809 | 711 | T |
| Butler Co Fire | Fire Police | 1821 | 71d | T |
| Butler Co Fire | Air Operations | 1831 | 727 | T |
| Butler Co Fire | Air Operations | 1832 | 728 | T |
| ICORRS Systemwide Interop | ICORRS Fire | 2013 | 7dd | D |
| ICORRS Systemwide Interop | ICORRS Fire | 2014 | 7de | D |
| ICORRS Systemwide Interop | ICORRS Fire | 2015 | 7df | D |
| ICORRS Systemwide Interop | ICORRS Fire | 2016 | 7e0 | D |
| Butler Co EMS | Butler Co EMS – Dispatch | 1851 | 73b | T |
| Butler Co EMS | EMS Operations | 1852 | 73c | T |
| ICORRS Systemwide Interop | Icorrs EMS | 2009 | 7d9 | D |
| ICORRS Systemwide Interop | Icorrs EMS | 2010 | 7da | D |
| ICORRS Systemwide Interop | Icorrs EMS | 2011 | 7db | D |
| ICORRS Systemwide Interop | Icorrs EMS | 2012 | 7dc | D |
| Butler Co EMS | EMS Hospital | 1853 | 73d | T |
Nearest trunked radio sites
Distances are measured from the center of Homeacre-Lyndora.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Homeacre-Lyndora?
We do not have a fire dispatch channel listed specifically for Homeacre-Lyndora. The county-level fire dispatch channels in the same county: Butler County Fire/EMS Paging 460.0625 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Homeacre-Lyndora?
Yes. The county-level systems that cover Homeacre-Lyndora are Fire and EMS talkgroups are listed for ICORRS (Inter County Regional Radio System): 23 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Homeacre-Lyndora?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Homeacre-Lyndora?
For Homeacre-Lyndora, start with the Butler Co Simulcast site of ICORRS (Inter County Regional Radio System). Its control channels are 858.0125, 858.5625, 858.9625, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.