About Lumber Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lumber: Cameron County Fire 453.7375 MHz, narrow FM, 162.2 PL. County-level ems dispatch that covers Lumber: Cameron County EMS 462.9500 MHz, narrow FM, no tone.
- 12 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Cameron County channels that also cover Lumber
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cameron County Fire | Cameron County Fire – Dispatch | 453.7375 In 458.7375 | 162.2 PL | FMN | WPLY992 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cameron County Fire | Cameron County Fire – Fire Ground | 458.3000 | 162.2 PL | FMN | WPLY922 |
| Cameron County Fire | Cameron County Fire – Fire Ground | 458.8125 | 162.2 PL | FMN | WPLY922 |
| Cameron County Fire | Cameron County Fire – Fire Ground | 458.8500 | 162.2 PL | FMN | WPLY922 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cameron County Fire | Wittimore Repeater | 453.2375 In 458.2375 | 141.3 PL | FMN | WPLY992 |
| Cameron County Fire | Grove Hill Repeater | 453.6625 In 458.6625 | 141.3 PL | FMN | WPLY992 |
| Cameron County Fire | Fire Police Operations | 458.6875 | 162.2 PL | FMN | WPLY992 |
| Cameron County Fire | Landing Zone Coordination | 458.8125 | 162.2 PL | FMN | WPLY992 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cameron County EMS | County EMS Med-9 – Alternate Dispatch | 462.9500 In 467.9500 | FMN | KNDS655 | |
| Cameron County EMS | County EMS Med-10 – Dispatch | 462.9750 In 467.9750 | FMN | KNDS655 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cameron County EMS | Cameron County Ambulance Association F | 155.2200 | FMN | KA92940 | |
| Cameron County EMS | Cameron County Ambulance Association F | 155.3400 | FMN | KA92940 |
Nearest trunked radio sites
Distances are measured from the center of Lumber.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lumber?
We do not have a fire dispatch channel listed specifically for Lumber. The county-level fire dispatch channels in the same county: Cameron County Fire 453.7375 MHz, narrow FM, 162.2 PL.
What frequency does EMS or the ambulance service use in Lumber?
We do not have a EMS dispatch channel listed specifically for Lumber. The county-level EMS dispatch channels in the same county: Cameron County EMS 462.9500 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Lumber?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Lumber?
For Lumber, start with the Austin (POTT41) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 155.19, 155.685 MHz. Program a control channel first; the scanner finds the voice channels from it.