About Eyers Grove Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Eyers Grove: County Fire/EMS Dispatch 154.0550 MHz, narrow FM, no tone. County-level ems dispatch that covers Eyers Grove: Bloomsburg Fair EMS 159.3375 MHz, narrow FM, CSQ.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Columbia County channels that also cover Eyers Grove
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire/EMS Dispatch | County Fire/EMS Dispatch | 154.0550 | FMN | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Berwick Fireground Fire | Berwick Fireground | 156.0675 | CSQ | FMN | WQLL217 |
| Columbia County Fire | County Operations | 151.4225 | 351 DPL | FMN | KGD704 |
| Columbia County Fire | ECEN Talkaround | 155.3550 | 025 DPL | FMN | — |
| Columbia County Fire | County Operations | 159.3000 | 351 DPL | FMN | KGD704 |
| County Fire 1 Low-Band | County Fire 1 Low-Band (Interop) | 46.1200 | CSQ | FM | KGD704 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bloomsburg Fair EMS | Fair EMS | 159.3375 | CSQ | FMN | — |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Columbia County EMS | EMS Med | 462.9500 In 467.9500 | 210.7 PL | FMN | WYZ234 |
| Columbia County EMS | EMS Med | 462.9750 In 467.9750 | 210.7 PL | FMN | WYZ234 |
| Columbia County EMS | EMS Med | 463.0000 In 468.0000 | 210.7 PL | FMN | WYZ234 |
Nearest trunked radio sites
Distances are measured from the center of Eyers Grove.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Eyers Grove?
We do not have a fire dispatch channel listed specifically for Eyers Grove. The county-level fire dispatch channels in the same county: County Fire/EMS Dispatch 154.0550 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Eyers Grove?
We do not have a EMS dispatch channel listed specifically for Eyers Grove. The county-level EMS dispatch channels in the same county: Bloomsburg Fair EMS 159.3375 MHz, narrow FM, CSQ.
What scanner do I need to listen to fire and EMS in Eyers Grove?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Eyers Grove?
For Eyers Grove, start with the Millville (COLU02) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 153.1925, 153.305 MHz. Program a control channel first; the scanner finds the voice channels from it.