Skip to content

Locust Fire and EMS Frequencies

We do not have frequencies listed specifically for Locust in Columbia County, Pennsylvania yet. Countywide channels for Columbia County that may also cover this area are shown below when we have them. The closest trunked radio site we have is ECEN Simulcast (PA-STARNet: Pennsylvania Statewide Radio Network), about 5 miles away.

About Locust Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Locust: County Fire/EMS Dispatch 154.0550 MHz, narrow FM, no tone. County-level ems dispatch that covers Locust: Bloomsburg Fair EMS 159.3375 MHz, narrow FM, CSQ.

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Columbia County channels that also cover Locust

Fire Dispatch

Fire Dispatch frequencies for Columbia County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire/EMS DispatchCounty Fire/EMS Dispatch154.0550FMN—

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Columbia County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Berwick Fireground FireBerwick Fireground156.0675CSQFMNWQLL217
Columbia County FireCounty Operations151.4225351 DPLFMNKGD704
Columbia County FireECEN Talkaround155.3550025 DPLFMN—
Columbia County FireCounty Operations159.3000351 DPLFMNKGD704
County Fire 1 Low-BandCounty Fire 1 Low-Band (Interop)46.1200CSQFMKGD704

EMS Dispatch

EMS Dispatch frequencies for Columbia County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bloomsburg Fair EMSFair EMS159.3375CSQFMN—

EMS Talk-around

EMS Talk-around frequencies for Columbia County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Columbia County EMSEMS Med462.9500
In 467.9500
210.7 PLFMNWYZ234
Columbia County EMSEMS Med462.9750
In 467.9750
210.7 PLFMNWYZ234
Columbia County EMSEMS Med463.0000
In 468.0000
210.7 PLFMNWYZ234

Nearest trunked radio sites

Distances are measured from the center of Locust.

ECEN Simulcast · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 48 (hex 30) · NAC 941 · about 5 mi away
Control 161.825, 161.8625, 161.9
Voice 161.9375
Simulcast · Schuylkill County Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 5D0 · about 13 mi away
Control 152.0375, 152.2175, 152.6075
Voice 152.0975, 152.1425, 152.5475, 152.7875
Mahanoy City (SCHU36) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 139 (hex 8B) · NAC 947 · about 14 mi away
Control 152.0525, 152.0675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Locust?

We do not have a fire dispatch channel listed specifically for Locust. The county-level fire dispatch channels in the same county: County Fire/EMS Dispatch 154.0550 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Locust?

We do not have a EMS dispatch channel listed specifically for Locust. The county-level EMS dispatch channels in the same county: Bloomsburg Fair EMS 159.3375 MHz, narrow FM, CSQ.

What scanner do I need to listen to fire and EMS in Locust?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Locust?

For Locust, start with the ECEN Simulcast site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 161.825, 161.8625, 161.9 MHz. Program a control channel first; the scanner finds the voice channels from it.