Skip to content

Fulton County Fire and EMS Frequencies

Fulton County in Pennsylvania has 8 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Fulton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Fulton County: County Emergency Services 453.3625 MHz, narrow FM, 94.8 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Fulton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Fulton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Emergency ServicesFire/EMS F-1 Dispatch453.3625
In 458.3625
94.8 PLFMNWQWP910

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fulton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Emergency ServicesFire Mutual-Aid154.2800FMNWQXG231
County Emergency ServicesFire/EMS Operations453.5375
In 458.5375
NAC 948P25WQWP910
County Emergency ServicesFire/EMS Operations460.0875
In 465.0875
NAC 948P25WQWP910
County Emergency ServicesFire/EMS Operations460.4250
In 465.4250
NAC 948P25WQWP910
McConnellsburg Vol Fire CoMcConnellsburg Vol Fire Co453.0625FMNKGG233
Needmore Vol Fire CoNeedmore Vol Fire Co453.9875FMNWQUH884

EMS Tactical

EMS Tactical frequencies for Fulton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Emergency ServicesFulton County Medical Center to Ambulance463.1000
In 468.1000
123.0 PLFMNWQXG231

Radio system sites in Fulton County

Program the control channel first; your scanner finds the voice channels from it.

Fulton Simulcast · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 3 (hex 3) · NAC 94A
Control 151.2275, 156.21
Voice 155.52
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Fulton County

Common questions

What frequency does the fire department use in Fulton County?

Fire dispatch channels listed for Fulton County: County Emergency Services 453.3625 MHz, narrow FM, 94.8 PL.

What scanner do I need to listen to fire and EMS in Fulton County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Fulton County?

For Fulton County, start with the Fulton Simulcast site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 151.2275, 156.21 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Fulton County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Fulton County are marked encrypted.