About Crucible Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Crucible: County Fire Dispatch 46.4600 MHz, FM, 203.5 PL; Greene Co Fire Dispatch/Paging 156.0900 MHz, narrow FM, CSQ. County-level ems dispatch that covers Crucible: County EMS Dispatch 155.2950 MHz, narrow FM, 141.3 PL.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 5 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Greene County channels that also cover Crucible
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire Dispatch | County Fire Dispatch | 46.4600 | 203.5 PL | FM | KGD920 |
| Greene Co Fire Dispatch/Paging | Greene Co Fire Dispatch/Paging | 156.0900 | CSQ | FMN | WNJN328 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fireground Ops | County Fireground Operations | 46.1200 | FM | KGD920 | |
| Greene Co Fire Unconfirmed | Greene Co Fire | 151.2725 In 158.8650 | 156 DPL | FMN | WNJN328 |
| Greene Co Fire | Greene Co Fire (Tactical? / NE?) | 155.3175 In 159.0900 | NAC 293 | P25 | WNJN328 |
| Greene Co Fire - Airport Tactical | Greene Co Fire – Airport Tactical | 156.2175 In 159.0225 | NAC 293 | P25 | WNJN328 |
| Greene Co Fire - Central Tactical | Greene Co Fire – Central Tactical | 151.2725 In 158.8650 | NAC 293 | P25 | WNJN328 |
| Greene Co Fire - River Tactical | Greene Co Fire – River Tactical | 155.7450 In 153.9425 | NAC 293 | P25 | WQWN897 |
| Greene Co Fire - West Tactical | Greene Co Fire – West Tactical | 154.0850 In 150.9950 | NAC 293 | P25 | WNJN328 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County EMS Dispatch | County EMS Dispatch | 155.2950 | 141.3 PL | FMN | WNJN328 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County EMS to hospital | County EMS to hospital | 155.3400 | FMN | KZV328 | |
| County EMS to hospital | County EMS to hospital | 155.3550 | FMN | KZV328 |
Nearest trunked radio sites
Distances are measured from the center of Crucible.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Crucible?
We do not have a fire dispatch channel listed specifically for Crucible. The county-level fire dispatch channels in the same county: County Fire Dispatch 46.4600 MHz, FM, 203.5 PL; Greene Co Fire Dispatch/Paging 156.0900 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Crucible?
We do not have a EMS dispatch channel listed specifically for Crucible. The county-level EMS dispatch channels in the same county: County EMS Dispatch 155.2950 MHz, narrow FM, 141.3 PL.
What scanner do I need to listen to fire and EMS in Crucible?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Crucible?
For Crucible, start with the Waynesburg (GREE32) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 854.5375, 854.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.