Skip to content

Brady Fire and EMS Frequencies

We do not have frequencies listed specifically for Brady in Huntingdon County, Pennsylvania yet. Countywide channels for Huntingdon County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Loop Lookout (HUNT01) (PA-STARNet: Pennsylvania Statewide Radio Network), about 13 miles away.

About Brady Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Brady: Huntingdon County Fire 460.5875 MHz, narrow FM, 156.7 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 7 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Huntingdon County channels that also cover Brady

Fire Dispatch

Fire Dispatch frequencies for Huntingdon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Huntingdon County FireFire & EMS Dispatch460.5875
In 465.5875
156.7 PLFMNKNDQ382

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Huntingdon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Huntingdon County FireOperations453.3375
In 458.3375
NAC 337P25KNDQ382
Huntingdon County FireOperations453.7500
In 458.7500
NAC 750P25KNDQ382
Huntingdon County FireHuntingdon County Fire – Tactical Channel458.2875156.7 PLFMNKNDQ382
Huntingdon County FireHuntingdon County Fire – Tactical Channel458.6625NAC 625P25KNDQ382
Huntingdon County FireHuntingdon County Fire – Tactical Channel458.6875NAC 875P25KNDQ382
Huntingdon County FireOperations462.9875
In 467.9875
NAC 987P25KNDQ382
Huntingdon County FireHuntingdon County Fire – Tactical Channel465.1875NAC 875P25KNDQ382
Huntingdon County FireHuntingdon County Fire – Tactical Channel465.3875156.7 PLFMNKNDQ382

EMS Tactical

EMS Tactical frequencies for Huntingdon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Huntingdon County EMSEMS Operations462.9500
In 467.9500
NAC 950P25KNDQ382

Nearest trunked radio sites

Distances are measured from the center of Brady.

Loop Lookout (HUNT01) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 62 (hex 3E) · NAC 947 · about 13 mi away
Control 154.905, 155.46
Voice 154.1675
Butler Knob (HUNT04) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 47 (hex 2F) · NAC 948 · about 13 mi away
Control 154.13, 154.4225
Voice 154.9725
Blain (PERR01) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 51 (hex 33) · NAC 943 · about 20 mi away
Control 158.7975, 159.2175
Voice 159.2325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Brady?

We do not have a fire dispatch channel listed specifically for Brady. The county-level fire dispatch channels in the same county: Huntingdon County Fire 460.5875 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Brady?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Brady?

For Brady, start with the Loop Lookout (HUNT01) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 154.905, 155.46 MHz. Program a control channel first; the scanner finds the voice channels from it.