Skip to content

Shade Gap Fire and EMS Frequencies

We do not have frequencies listed specifically for Shade Gap in Huntingdon County, Pennsylvania yet. Countywide channels for Huntingdon County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Butler Knob (HUNT04) (PA-STARNet: Pennsylvania Statewide Radio Network), about 9 miles away.

About Shade Gap Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Shade Gap: Huntingdon County Fire 460.5875 MHz, narrow FM, 156.7 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 7 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Huntingdon County channels that also cover Shade Gap

Fire Dispatch

Fire Dispatch frequencies for Huntingdon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Huntingdon County FireFire & EMS Dispatch460.5875
In 465.5875
156.7 PLFMNKNDQ382

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Huntingdon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Huntingdon County FireOperations453.3375
In 458.3375
NAC 337P25KNDQ382
Huntingdon County FireOperations453.7500
In 458.7500
NAC 750P25KNDQ382
Huntingdon County FireHuntingdon County Fire – Tactical Channel458.2875156.7 PLFMNKNDQ382
Huntingdon County FireHuntingdon County Fire – Tactical Channel458.6625NAC 625P25KNDQ382
Huntingdon County FireHuntingdon County Fire – Tactical Channel458.6875NAC 875P25KNDQ382
Huntingdon County FireOperations462.9875
In 467.9875
NAC 987P25KNDQ382
Huntingdon County FireHuntingdon County Fire – Tactical Channel465.1875NAC 875P25KNDQ382
Huntingdon County FireHuntingdon County Fire – Tactical Channel465.3875156.7 PLFMNKNDQ382

EMS Tactical

EMS Tactical frequencies for Huntingdon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Huntingdon County EMSEMS Operations462.9500
In 467.9500
NAC 950P25KNDQ382

Nearest trunked radio sites

Distances are measured from the center of Shade Gap.

Butler Knob (HUNT04) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 47 (hex 2F) · NAC 948 · about 9 mi away
Control 154.13, 154.4225
Voice 154.9725
Upper Strasburg (FRAN01) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 49 (hex 31) · NAC 94C · about 11 mi away
Control 151.1825, 151.385
Voice 155.2425
Three Square Hollow · South Central Interoperability Network
RFSS 1 · Site 42 (hex 2A) · NAC 1E2 · about 18 mi away
Control 851.4, 851.7, 852.05, 852.3125
Voice 851.05, 852.6
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Shade Gap?

We do not have a fire dispatch channel listed specifically for Shade Gap. The county-level fire dispatch channels in the same county: Huntingdon County Fire 460.5875 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Shade Gap?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Shade Gap?

For Shade Gap, start with the Butler Knob (HUNT04) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 154.13, 154.4225 MHz. Program a control channel first; the scanner finds the voice channels from it.