About Blairsville Fire and EMS Frequencies
Quick answer: Trunked: ICORRS (Inter County Regional Radio System), for example Indiana Co Fire talkgroup 777 (hex 309).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: ICORRS (Inter County Regional Radio System): 31 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Blairsville, start with the Derry (WEST30) site of PA-STARNet: Pennsylvania Statewide Radio Network, about 6 miles away. Its control channels: 154.92, 161.875 MHz.
Data updated .
Indiana County channels that also cover Blairsville
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Indiana County EMS | County EMS F2 – EMS-to-Hospital | 155.3250 | 114.8 PL | FMN | KSP313 |
ICORRS (Inter County Regional Radio System)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Indiana Co Fire | Indiana Co Fire – Dispatch | 777 | 309 | D |
| Indiana Co Fire | Fire Operations | 778 | 30a | D |
| Indiana Co Fire | Fire Operations | 779 | 30b | D |
| Indiana Co Fire | Fire Operations | 780 | 30c | D |
| Indiana Co Fire | Fire Operations | 781 | 30d | D |
| Indiana Co Fire | Fire Operations | 782 | 30e | D |
| Indiana Co Fire | Fire Operations | 783 | 30f | D |
| Indiana Co Fire | Fire Operations | 784 | 310 | D |
| Indiana Co Fire | Fire Operations | 785 | 311 | D |
| Indiana Co Fire | Fire Command | 786 | 312 | D |
| Indiana Co Fire | Fire Command | 787 | 313 | D |
| Indiana Co Fire | Fire Command | 788 | 314 | D |
| Indiana Co Fire | Fire Command | 789 | 315 | D |
| ICORRS Systemwide Interop | ICORRS Fire | 2013 | 7dd | D |
| ICORRS Systemwide Interop | ICORRS Fire | 2014 | 7de | D |
| ICORRS Systemwide Interop | ICORRS Fire | 2015 | 7df | D |
| ICORRS Systemwide Interop | ICORRS Fire | 2016 | 7e0 | D |
| Indiana Co EMS | Indiana Co EMS – Dispatch | 767 | 2ff | D |
| Indiana Co EMS | EMS Operations | 768 | 300 | D |
| Indiana Co EMS | EMS Operations | 769 | 301 | D |
| Indiana Co EMS | EMS Operations | 770 | 302 | D |
| Indiana Co EMS | EMS Countywide | 771 | 303 | D |
| Indiana Co EMS | Special Medical Response Team | 774 | 306 | D |
| Indiana Co EMS | Special Services Group | 775 | 307 | D |
| Indiana Co EMS | Special Services Group | 776 | 308 | D |
| ICORRS Systemwide Interop | Icorrs EMS | 2009 | 7d9 | D |
| ICORRS Systemwide Interop | Icorrs EMS | 2010 | 7da | D |
| ICORRS Systemwide Interop | Icorrs EMS | 2011 | 7db | D |
| ICORRS Systemwide Interop | Icorrs EMS | 2012 | 7dc | D |
| Indiana Co EMS | Indiana Regional Medical Center | 772 | 304 | D |
| Indiana Co EMS | EMS Medical Command | 773 | 305 | D |
Nearest trunked radio sites
Distances are measured from the center of Blairsville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Blairsville?
Yes. The county-level systems that cover Blairsville are Fire and EMS talkgroups are listed for ICORRS (Inter County Regional Radio System): 31 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Blairsville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Blairsville?
For Blairsville, start with the Derry (WEST30) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 154.92, 161.875 MHz. Program a control channel first; the scanner finds the voice channels from it.