About Franklin Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Franklin: Fire and EMS Dispatch 151.0400 MHz, narrow FM, 156.7 PL.
- 14 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Snyder County channels that also cover Franklin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS Dispatch | Fire and EMS Dispatch | 151.0400 In 153.9200 | 156.7 PL | FMN | WXT525 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Municipalities Fire | Dauntless Hook and Ladder | 154.1375 | 261 DPL | FMN | WPMK921 |
| Snyder County Fire | Snyder County Fire – Fire Ground | 151.0850 | 156.7 PL | FMN | WXT525 |
| Snyder County Fire | Snyder County Fire – Fire Ground | 151.4300 | 141.3 PL | FMN | WPQC621 |
| Snyder County Fire | DH & L Fire (Local Operations) | 154.1375 | 261 DPL | FMN | WPMK921 |
| Snyder County Fire | Snyder County Fire – Fire Ground | 154.2200 | 167.9 PL | FMN | WPQC621 |
| Snyder County Fire | Snyder County Fire – Fire Ground | 154.2650 | 156.7 PL | FMN | WPQC621 |
| Snyder County Fire | Snyder County Fire – Fire Ground | 154.3100 | 331 DPL | FMN | WPQC621 |
| Snyder County Fire | Snyder County Fire – Fire Ground | 154.3550 | 167.9 PL | FMN | WPQC621 |
| Snyder County Fire | Snyder County Fire – Fire Ground | 154.3850 | FMN | WPQC621 | |
| Snyder County Fire | Fire 2 / EMS ops | 156.1200 In 159.2025 | 156.7 PL | FMN | WPTG348 |
| Snyder County Fire | Snyder County Fire – Fire Ground (Countywide) | 156.2250 In 151.2200 | 114.8 PL | FMN | WXT525 |
| Snyder County Fire | Snyder County Fire – Fire Ground (Fire Police) | 159.4650 | 241.8 PL | FMN | WPUI777 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Snyder County Fire | Snyder County Fire – Alternate (EMA) | 155.8200 | 156.7 PL | FMN | KGH652 |
Nearest trunked radio sites
Distances are measured from the center of Franklin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Franklin?
We do not have a fire dispatch channel listed specifically for Franklin. The county-level fire dispatch channels in the same county: Fire and EMS Dispatch 151.0400 MHz, narrow FM, 156.7 PL.
What scanner do I need to listen to fire and EMS in Franklin?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Franklin?
For Franklin, start with the Shade Mtn (SNYD02) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 154.9425, 155.505 MHz. Program a control channel first; the scanner finds the voice channels from it.