Skip to content

Perry Fire and EMS Frequencies

We do not have frequencies listed specifically for Perry in Snyder County, Pennsylvania yet. Countywide channels for Snyder County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Shade Mtn (SNYD02) (PA-STARNet: Pennsylvania Statewide Radio Network), about 6 miles away.

About Perry Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Perry: Fire and EMS Dispatch 151.0400 MHz, narrow FM, 156.7 PL.

  • 14 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Snyder County channels that also cover Perry

Fire Dispatch

Fire Dispatch frequencies for Snyder County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMS DispatchFire and EMS Dispatch151.0400
In 153.9200
156.7 PLFMNWXT525

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Snyder County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Municipalities FireDauntless Hook and Ladder154.1375261 DPLFMNWPMK921
Snyder County FireSnyder County Fire – Fire Ground151.0850156.7 PLFMNWXT525
Snyder County FireSnyder County Fire – Fire Ground151.4300141.3 PLFMNWPQC621
Snyder County FireDH & L Fire (Local Operations)154.1375261 DPLFMNWPMK921
Snyder County FireSnyder County Fire – Fire Ground154.2200167.9 PLFMNWPQC621
Snyder County FireSnyder County Fire – Fire Ground154.2650156.7 PLFMNWPQC621
Snyder County FireSnyder County Fire – Fire Ground154.3100331 DPLFMNWPQC621
Snyder County FireSnyder County Fire – Fire Ground154.3550167.9 PLFMNWPQC621
Snyder County FireSnyder County Fire – Fire Ground154.3850FMNWPQC621
Snyder County FireFire 2 / EMS ops156.1200
In 159.2025
156.7 PLFMNWPTG348
Snyder County FireSnyder County Fire – Fire Ground (Countywide)156.2250
In 151.2200
114.8 PLFMNWXT525
Snyder County FireSnyder County Fire – Fire Ground (Fire Police)159.4650241.8 PLFMNWPUI777

Fire Talk-around

Fire Talk-around frequencies for Snyder County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Snyder County FireSnyder County Fire – Alternate (EMA)155.8200156.7 PLFMNKGH652

Nearest trunked radio sites

Distances are measured from the center of Perry.

Shade Mtn (SNYD02) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 46 (hex 2E) · NAC 942 · about 6 mi away
Control 154.9425, 155.505
Voice 155.4675
Mahantango · South Central Interoperability Network
RFSS 1 · Site 6 (hex 6) · about 9 mi away
Control 453.05, 453.4375, 453.775, 460.1
Voice 460.125, 460.225
Pillow Mountain · South Central Interoperability Network
RFSS 1 · Site 8 (hex 8) · about 12 mi away
Control 453.7375, 460.075, 460.2375
Voice 460.125, 460.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Perry?

We do not have a fire dispatch channel listed specifically for Perry. The county-level fire dispatch channels in the same county: Fire and EMS Dispatch 151.0400 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Perry?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Perry?

For Perry, start with the Shade Mtn (SNYD02) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 154.9425, 155.505 MHz. Program a control channel first; the scanner finds the voice channels from it.