About Harmony Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Harmony: Fire and EMS 33.8600 MHz, FM, CSQ. County-level ems dispatch that covers Harmony: Fire and EMS 462.9500 MHz, narrow FM, 162.2 PL.
- 25 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Susquehanna County channels that also cover Harmony
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | County Low-band Fire Dispatch/Operations | 33.8600 | CSQ | FM | KNIP830 |
| Fire and EMS | County Fire Dispatch | 155.0625 | 162.2 PL | FMN | WPPB928 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | County Low-band Fire Police | 33.8000 | CSQ | FM | KGF801 |
| Fire and EMS | Harford Fire Department | 151.0625 In 158.9775 | 167.9 PL | FMN | WQGX359 |
| Fire and EMS | Thompson Hose Company | 151.2050 In 159.3975 | 192.8 PL | FMN | WPYE499 |
| Fire and EMS | County Fire Operations | 151.4750 In 159.3750 | 162.2 PL | FMN | WPZF277 |
| Fire and EMS | Susquehanna Fire – Future | 153.8450 | 162.2 PL | FMN | WPPB928 |
| Fire and EMS | Forest City Fire | 153.8900 | CSQ | FMN | WPJZ246 |
| Fire and EMS | United Fire Company (Montrose) | 153.9725 | 151.4 PL | FMN | WPVS403 |
| Fire and EMS | Susquehanna Fire Department | 154.2500 In 150.8050 | 155 DPL | FMN | WPUY651 |
| Fire and EMS | United Fire Company (Montrose) | 154.4375 | FMN | WPVS403 | |
| Fire and EMS | County Fire Tactical | 154.8900 | 162.2 PL | FMN | WPPB928 |
| Fire and EMS | County Fire Tactical | 155.0325 | 162.2 PL | FMN | WPPB928 |
| Fire and EMS | County Fire Tactical | 155.1150 | 162.2 PL | FMN | WPPB928 |
| Fire and EMS | County Fire Police Operations | 155.6925 | CSQ | FMN | WQBB935 |
| Fire and EMS | United Fire Company (Montrose) | 155.9325 | FMN | WPVS403 | |
| Fire and EMS | Susquehanna County EMA | 158.8350 | FMN | — | |
| Fire and EMS | Susquehanna Fire – Future | 158.9250 | 162.2 PL | FMN | WPPB928 |
| Fire and EMS | County Fire Tactical | 158.9400 | 162.2 PL | FMN | WPPB928 |
| Fire and EMS | United Fire Company Repeater | 159.2775 In 153.9500 | 151.4 PL | FMN | WQEB563 |
| Fire and EMS | Clifford Township Fire | 159.4500 In 153.7750 | 110.9 PL | FMN | WPNP612 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | County EMS MED-9 – Montrose Tower | 462.9500 In 467.9500 | 162.2 PL | FMN | WPJN525 |
| Fire and EMS | County EMS MED-9 – Elk Mountain Tower | 462.9500 In 467.9500 | 179.9 PL | FMN | WPJN525 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | Susquehanna EMS Operations | 154.4375 In 158.9400 | 162.2 PL | FMN | WRHY229 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire and EMS | Montrose General Hospital | 33.0800 | CSQ | FM | — |
Nearest trunked radio sites
Distances are measured from the center of Harmony.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Harmony?
We do not have a fire dispatch channel listed specifically for Harmony. The county-level fire dispatch channels in the same county: Fire and EMS 33.8600 MHz, FM, CSQ.
What frequency does EMS or the ambulance service use in Harmony?
We do not have a EMS dispatch channel listed specifically for Harmony. The county-level EMS dispatch channels in the same county: Fire and EMS 462.9500 MHz, narrow FM, 162.2 PL.
What scanner do I need to listen to fire and EMS in Harmony?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Harmony?
For Harmony, start with the New Milford (SUSQ06) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 152.4125, 153.3725 MHz. Program a control channel first; the scanner finds the voice channels from it.