About Salem Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Salem: Wayne County Fire 33.8600 MHz, FM, CSQ. County-level ems dispatch that covers Salem: Wayne County EMS 155.3100 MHz, narrow FM, 156.7 PL.
- 16 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Wayne County channels that also cover Salem
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wayne County Fire | Wayne County Fire – Dispatch /Operations (being phased out) | 33.8600 | CSQ | FM | KYL616 |
| Wayne County Fire | Fire 1 / Dispatch | 151.4150 | 167.9 PL | FMN | WQGD279 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Forest Fireground Fire | Forest Fireground | 153.8900 | CSQ | FMN | — |
| Station 21 - Beach Lake Fireground | Station 21 – Beach Lake Fireground | 33.9200 | FM | KZF831 | |
| Station 43 - Browndale Fireground | Station 43 – Browndale Fireground | 153.8900 | FMN | — | |
| Station 9 - Hawley Fireground | Station 9 – Hawley Fireground | 153.8300 | FMN | KB91657 | |
| Waymart Fireground Fire | Waymart Fireground | 155.7450 | 82.5 PL | FMN | WQGS322 |
| Wayne County Fire | Wayne County Fire – Fire Ground | 153.9125 | 167.9 PL | FMN | WQKK534 |
| Wayne County Fire | Wayne County Fire – Fire Ground | 155.1375 | 167.9 PL | FMN | WQKK534 |
| Wayne County Fire | Fire 2 / Command | 155.6775 | 167.9 PL | FMN | WQGD279 |
| Wayne County Fire | Wayne County Fire – Fire Ground | 155.9175 | 167.9 PL | FMN | WQGD279 |
| Wayne County Fire | Wayne County Fire – Fire Ground | 156.0375 | 167.9 PL | FMN | WQGD279 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wayne County Fire | Fire Police | 153.9575 | 167.9 PL | FMN | WQKG813 |
| Wayne County Fire | Hamlin Fire & Rescue Company | 154.4300 | 156.7 PL | FMN | KNCB739 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wayne County EMS | Dispatch & Operations | 155.3100 | 156.7 PL | FMN | KDU721 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wayne Medics Private Channel EMS | Wayne Medics Private Channel | 151.5650 | 624 DPL | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Salem.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Salem?
We do not have a fire dispatch channel listed specifically for Salem. The county-level fire dispatch channels in the same county: Wayne County Fire 33.8600 MHz, FM, CSQ.
What frequency does EMS or the ambulance service use in Salem?
We do not have a EMS dispatch channel listed specifically for Salem. The county-level EMS dispatch channels in the same county: Wayne County EMS 155.3100 MHz, narrow FM, 156.7 PL.
What scanner do I need to listen to fire and EMS in Salem?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Salem?
For Salem, start with the Archbald (LACK53) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 152.2925, 161.8375 MHz. Program a control channel first; the scanner finds the voice channels from it.