Skip to content

Gillisonville Fire and EMS Frequencies

We do not have frequencies listed specifically for Gillisonville in Jasper County, South Carolina yet. Countywide channels for Jasper County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Yemassee (Palmetto 800), about 11 miles away.

About Gillisonville Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Gillisonville: Jasper Co. FD and EMS Dispatch 154.4150 MHz, FM, 141.3 PL. Trunked: Palmetto 800, for example Jasper County Fire talkgroup 6541 (hex 198d).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Palmetto 800: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Gillisonville, start with the Yemassee site of Palmetto 800, about 11 miles away. Its control channels: 853.75, 856.8625 MHz.

Data updated .

Jasper County channels that also cover Gillisonville

EMS Dispatch

EMS Dispatch frequencies for Jasper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper Co. FD and EMS DispatchJasper Co. Fire Department and EMS Dispatch154.4150
In 153.9500
141.3 PLFMWNVP810

Hospitals & Medical

Hospitals & Medical frequencies for Jasper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper Co. EMS HEARJasper Co. EMS HEAR (Hospital)155.3400FMKTK521
Jasper County HospitalJasper Co. Hospital155.1750FMKTK521

Palmetto 800

Palmetto 800 talkgroups
AgencyDescriptionTalkgroupHexMode
Jasper County FireJasper County Fire – Dispatch6541198dD
Jasper County FireJasper County Fire – Tactical Channel6542198eD
Jasper County FireJasper County Fire – Tactical Channel6543198fD
Jasper County HospitalFire Rescue Med658119b5D

Nearest trunked radio sites

Distances are measured from the center of Gillisonville.

Yemassee · Palmetto 800
RFSS 1 · Site 49 (hex 31) · NAC 1D6 · about 11 mi away
Control 853.75, 856.8625
Voice 851.25, 851.4875, 852.45, 853.1375, 854.3375, 855.0625
Jasper · Palmetto 800
RFSS 1 · Site 50 (hex 32) · NAC 1D6 · about 12 mi away
Control 853.275, 853.8625
Voice 851.175, 851.5625, 851.9125, 852.3625, 852.8875, 854.2875
Robertville · Palmetto 800
RFSS 1 · Site 51 (hex 33) · about 14 mi away
Control 853.9625
Voice 851.0625, 851.3125, 851.7625, 852.2, 852.325, 852.825, 857.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Gillisonville?

We do not have a EMS dispatch channel listed specifically for Gillisonville. The county-level EMS dispatch channels in the same county: Jasper Co. FD and EMS Dispatch 154.4150 MHz, FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Gillisonville?

Yes. The county-level systems that cover Gillisonville are Fire and EMS talkgroups are listed for Palmetto 800: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Gillisonville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Gillisonville?

For Gillisonville, start with the Yemassee site of Palmetto 800. Its control channels are 853.75, 856.8625 MHz. Program a control channel first; the scanner finds the voice channels from it.