About Manville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Manville: FD and EMS Dispatch Simulcast of Palmetto 800 154.4300 MHz, FM, 118.8 PL. Trunked: Palmetto 800, for example Lee County Fire talkgroup 24041 (hex 5de9).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Palmetto 800: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Manville, start with the Camden site of Palmetto 800, about 13 miles away. Its control channels: 853.1, 853.3625 MHz.
Data updated .
Lee County channels that also cover Manville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| FD and EMS Dispatch Simulcast of Palmetto 800 | Fire Department and EMS Dispatch Simulcast of Palmetto | 154.4300 | 118.8 PL | FM | KEF745 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lee County EMS | Lee County EMS – Tactical Channel | 158.7300 | 118.8 PL | FM | KEF745 |
Palmetto 800
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lee County Fire | Fire and EMS Dispatch | 24041 | 5de9 | D |
| Lee County EMS | Lee County EMS – Tactical Channel | 24004 | 5dc4 | D |
Nearest trunked radio sites
Distances are measured from the center of Manville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Manville?
We do not have a fire dispatch channel listed specifically for Manville. The county-level fire dispatch channels in the same county: FD and EMS Dispatch Simulcast of Palmetto 800 154.4300 MHz, FM, 118.8 PL.
Do fire departments and EMS use a trunked radio system in Manville?
Yes. The county-level systems that cover Manville are Fire and EMS talkgroups are listed for Palmetto 800: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Manville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Manville?
For Manville, start with the Camden site of Palmetto 800. Its control channels are 853.1, 853.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.