Skip to content

Fairview Crossroads Fire and EMS Frequencies

We do not have frequencies listed specifically for Fairview Crossroads in Lexington County, South Carolina yet. Countywide channels for Lexington County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lexington County Simulcast (Palmetto 800), about 13 miles away.

About Fairview Crossroads Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Fairview Crossroads: Lexington Co. Fire Service Dispatch 154.1300 MHz, narrow FM, 162.2 PL. Trunked: Palmetto 800, for example Lexington County Fire talkgroup 24542 (hex 5fde).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Palmetto 800: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Fairview Crossroads, start with the Lexington County Simulcast site of Palmetto 800, about 13 miles away. Its control channels: 853.5, 855.4625, 859.2625 MHz.

Data updated .

Lexington County channels that also cover Fairview Crossroads

Fire Dispatch

Fire Dispatch frequencies for Lexington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lexington Co. Fire Service DispatchLexington Co. Fire Service Dispatch154.1300
In 158.7825
162.2 PLFMNKXG895

Hospitals & Medical

Hospitals & Medical frequencies for Lexington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lexington Co. EMS to HospitalLexington Co. EMS to Hospital155.3400203.5 PLFMWZT951

Palmetto 800

Palmetto 800 talkgroups
AgencyDescriptionTalkgroupHexMode
Lexington County FireLexington County Fire – Dispatch245425fdeD
Lexington County FireFire Administration245435fdfD
Lexington County FireFire Training24591600fD
Lexington County FireAirport Fire246656059D
Lexington County EMSLexington County EMS – Dispatch245665ff6D
Lexington County EMSEMS Administration245675ff7D
Lexington County EMSEMS Logistics245685ff8D
Lexington County EMSEMS Operations249626182D
Lexington County HospitalEMS to Palmetto Health245695ff9D
Lexington County HospitalEMS to Lexington Medical Center245705ffaD

Nearest trunked radio sites

Distances are measured from the center of Fairview Crossroads.

Lexington County Simulcast · Palmetto 800
RFSS 2 · Site 32 (hex 20) · NAC 1D1 · about 13 mi away
Control 853.5, 855.4625, 859.2625, 860.8875
Voice 852.65, 854.6375, 855.6125, 856.2625, 856.8875, 857.2625, 857.8875, 858.2625, 859.7125, 859.9625, 860.8375
Salley · Palmetto 800
RFSS 2 · Site 70 (hex 46) · NAC 1DF · about 15 mi away
Control 858.8375, 859.8375
Voice 851.9375, 852.7, 854.0625, 854.4625, 855.1375, 856.8375, 857.7125, 857.8375
Aiken County Simulcast · Palmetto 800
RFSS 2 · Site 2 (hex 2) · NAC 1D7 · about 24 mi away
Control 853.2, 853.4, 853.7, 853.7375
Voice 851.425, 851.925, 852.2, 852.425, 852.4875, 852.75, 856.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Fairview Crossroads?

We do not have a fire dispatch channel listed specifically for Fairview Crossroads. The county-level fire dispatch channels in the same county: Lexington Co. Fire Service Dispatch 154.1300 MHz, narrow FM, 162.2 PL.

Do fire departments and EMS use a trunked radio system in Fairview Crossroads?

Yes. The county-level systems that cover Fairview Crossroads are Fire and EMS talkgroups are listed for Palmetto 800: 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Fairview Crossroads?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Fairview Crossroads?

For Fairview Crossroads, start with the Lexington County Simulcast site of Palmetto 800. Its control channels are 853.5, 855.4625, 859.2625, 860.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.