About South Union Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers South Union: Oconee County Fire 154.1300 MHz, FM, 103.5 PL. County-level ems dispatch that covers South Union: Oconee County EMS 151.1300 MHz, FM, 210.7 PL. Trunked: Oconee County Emergency Services, for example Oconee Co FD talkgroup 121 (hex 79).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oconee County Emergency Services: 2 talkgroups; Palmetto 800: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For South Union, start with the Seneca site of Palmetto 800, about 10 miles away. Its control channels: 852.05, 852.6625, 853.1 MHz.
Data updated .
Oconee County channels that also cover South Union
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oconee County Fire | Oconee County Fire – Dispatch | 154.1300 In 150.8050 | 103.5 PL | FM | WNSN313 |
| Oconee County Fire | Oconee County Fire – Dispatch | 155.6475 In 159.1875 | 103.5 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oconee County EMS | Oconee County EMS – Dispatch | 151.1300 In 155.8350 | 210.7 PL | FM | WPPF456 |
| Oconee County EMS | Oconee County EMS – Dispatch | 152.4050 In 157.6650 | 192.8 PL | FM | WQPE642 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oconee County Hospital | EMS to Hospital | 155.3400 | 192.8 PL | FM | — |
Oconee County Emergency Services
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Oconee Co FD | Operations | 121 | 79 | T |
| Oconee Co FD | Operations | 122 | 7a | T |
Palmetto 800
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Oconee County EMS | Oconee County EMS – Tactical Channel | 47065 | b7d9 | D |
Nearest trunked radio sites
Distances are measured from the center of South Union.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in South Union?
We do not have a fire dispatch channel listed specifically for South Union. The county-level fire dispatch channels in the same county: Oconee County Fire 154.1300 MHz, FM, 103.5 PL.
What frequency does EMS or the ambulance service use in South Union?
We do not have a EMS dispatch channel listed specifically for South Union. The county-level EMS dispatch channels in the same county: Oconee County EMS 151.1300 MHz, FM, 210.7 PL.
Do fire departments and EMS use a trunked radio system in South Union?
Yes. The county-level systems that cover South Union are Fire and EMS talkgroups are listed for Oconee County Emergency Services: 2 talkgroups; Palmetto 800: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in South Union?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in South Union?
For South Union, start with the Seneca site of Palmetto 800. Its control channels are 852.05, 852.6625, 853.1, 853.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.