About Bon Homme Colony Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bon Homme Colony: Bon Homme County Fire 151.2650 MHz, FM, 156.7 PL. Trunked: South Dakota State Radio System, for example Bon Homme County Fire talkgroup 1387 (hex 56b).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bon Homme Colony, start with the Yankton (Gavin's Point) site of South Dakota State Radio System, about 14 miles away. Its control channels: 157.89, 158.07, 158.67 MHz.
Data updated .
Bon Homme County channels that also cover Bon Homme Colony
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bon Homme County Fire | Fire\EMS Pagers | 151.2650 In 159.3600 | 156.7 PL | FM | WPOX748 |
| Bon Homme County Fire | Tyndall Fire | 453.2500 In 458.2500 | 100.0 PL | FM | WPBC488 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bon Homme County Fire | Avon Fire | 154.1600 | FM | WNIA984 | |
| Bon Homme County Fire | Tabor Fire | 154.2500 | FM | WQME406 | |
| Bon Homme County Fire | Scotland Fire | 154.3700 | FM | WPFZ366 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bon Homme County Hospital | Scotland Hospital Paging | 152.0075 | FM | WQCE648 |
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bon Homme County Fire | Bon Homme County Fire – Dispatch | 1387 | 56b | D |
| Bon Homme County Fire | Bon Homme County Fire – Fire Ground | 1388 | 56c | D |
| Bon Homme County Fire | Bon Homme County Fire – Fire Ground | 1389 | 56d | D |
| Bon Homme County EMS | Bon Homme County EMS – Dispatch | 1390 | 56e | D |
| Bon Homme County EMS | Bon Homme County EMS – Tactical Channel | 1391 | 56f | D |
| Bon Homme County Hospital | Landman-Jungman Hospital | 1392 | 570 | D |
Nearest trunked radio sites
Distances are measured from the center of Bon Homme Colony.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bon Homme Colony?
We do not have a fire dispatch channel listed specifically for Bon Homme Colony. The county-level fire dispatch channels in the same county: Bon Homme County Fire 151.2650 MHz, FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Bon Homme Colony?
Yes. The county-level systems that cover Bon Homme Colony are Fire and EMS talkgroups are listed for South Dakota State Radio System: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bon Homme Colony?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bon Homme Colony?
For Bon Homme Colony, start with the Yankton (Gavin's Point) site of South Dakota State Radio System. Its control channels are 157.89, 158.07, 158.67 MHz. Program a control channel first; the scanner finds the voice channels from it.