Skip to content

Argo Fire and EMS Frequencies

We do not have frequencies listed specifically for Argo in Brookings County, South Dakota yet. Countywide channels for Brookings County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Toronto (South Dakota State Radio System), about 7 miles away.

About Argo Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Argo: Brookings County Fire 154.0850 MHz, FM, 156.7 PL. County-level ems dispatch that covers Argo: Brookings County EMS 155.3850 MHz, narrow FM, 210.7 PL. Trunked: South Dakota State Radio System, for example Brookings County Fire talkgroup 1329 (hex 531).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Argo, start with the Toronto site of South Dakota State Radio System, about 7 miles away. Its control channels: 157.5, 157.845, 159.975 MHz.

Data updated .

Brookings County channels that also cover Argo

Fire Dispatch

Fire Dispatch frequencies for Brookings County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brookings County FireBrookings County Fire – Dispatch154.0850
In 155.9850
156.7 PLFMKNNM907

EMS Dispatch

EMS Dispatch frequencies for Brookings County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brookings County EMSEMS Paging155.3850210.7 PLFMNKIU288

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Brookings County FireBrookings County Fire – Dispatch1329531D
Brookings County FireBrookings County Fire – Fire Ground1367557D
Brookings County FireBrookings County Fire – Fire Ground1368558D
Brookings County EMSMedical137155bD
Brookings County EMSMedical137255cD
Brookings County EMSMedical137355dD

Nearest trunked radio sites

Distances are measured from the center of Argo.

Toronto · South Dakota State Radio System
RFSS 1 · Site 34 (hex 22) · NAC 47F · about 7 mi away
Control 157.5, 157.845, 159.975
Voice 155.685, 160.335
Brookings · South Dakota State Radio System
RFSS 1 · Site 39 (hex 27) · NAC 475 · about 12 mi away
Control 157.92, 158.04
Voice 157.8, 158.61
Watertown · South Dakota State Radio System
RFSS 1 · Site 41 (hex 29) · NAC 477 · about 32 mi away
Control 157.89, 158.67
Voice 158.01, 158.52
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Argo?

We do not have a fire dispatch channel listed specifically for Argo. The county-level fire dispatch channels in the same county: Brookings County Fire 154.0850 MHz, FM, 156.7 PL.

What frequency does EMS or the ambulance service use in Argo?

We do not have a EMS dispatch channel listed specifically for Argo. The county-level EMS dispatch channels in the same county: Brookings County EMS 155.3850 MHz, narrow FM, 210.7 PL.

Do fire departments and EMS use a trunked radio system in Argo?

Yes. The county-level systems that cover Argo are Fire and EMS talkgroups are listed for South Dakota State Radio System: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Argo?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Argo?

For Argo, start with the Toronto site of South Dakota State Radio System. Its control channels are 157.5, 157.845, 159.975 MHz. Program a control channel first; the scanner finds the voice channels from it.